-
This is general enquiry - not a moaning session - but the work stream (I’m in the UK) seems to have dried up completely (at least from my perspective). I have been assured by 3D Hubs that the new business model (essentially ditching many hubs and taking forward only those that 3D Hubs consider to be…
-
Hi All I’m an experienced 3D printer but would like to examine the possibility of using Octoprint and hence need to start using a raspberry Pi device. Advice required on the basics - which version do i need (I want to communicate wirelessly to me printers). Bluetooth would be useful but not essenti…
-
No worries - thanks for the rapid response
-
Are you interested in selling the filament separately as a job-lot?
-
Apologies - didn’t look close enough at your list - looks like most are new. Would you sell the spools on their own?
-
Ho much are on the spools - photo will do
-
Likewise - country, price - all the things a buyer would want to know
-
All made in China mate
-
I’m in line with bvandenbroek - only thing I would say is the stock parts cooling arrangement is poor - uncontrolled since its on all the time (subset of the hot end cooling arrangement). That said there are 3rd party cooling solutions you can print/build that will do the job - there is a spare sock…
-
If the walls are too thin you may never be able to print with FDM technology. If you can thicken up the walls you may be able to print - same as Cobnut really need to see the .stl file
-
Has anybody else experienced a much reduced workflow (new orders) over the past 3-4 weeks (Midlands UK region). Not sure what the reason is - could it be seasonal or something more sinister. Would like to know if others are in the same predicament.
-
Simple - use an adhesive on the build plate (in theory clean glass should work but I’ve never had a lot of success). Pritt Stick or even better 3D Lac . ABS has a tendancy to warp especially if in an unenclosed build space (like yours). Try PLA or even better PETG (so called ABS substitute without a…
-
I guess Z-Temps will go to the wall now?
-
When I go to the Zortrax site I see 2 versions of 1.1.0 firmware - which is correct? (M200) Also - how can the material facility be accessed - cant see any additional meus or facilities on the M200 screen. In addition - do you know if Zortrax are upgrading Z-Suite so we can access the firmware chang…
-
Screen dump of Cura will be helpful
-
Classic under- extrusion. What are your extrusion settings - what material are you printing with?
-
http://www.artlab3dprpinting.com/ just bombs out - is this a typo?
-
Yes - and yes!
-
Over engineered solution which will not result in any significant quality improvement - will make your printer very expensive and if you wish to sell commercially outside the accepted price point for a PRUSA clone. Belts work, are reliable - easy to adjust and cheap to replace - they can give the ac…
-
Just so I’m clear - you have jobs loaded on the SD card - can you see these jobs?
-
Problem solved!! The SD card had blown - replaced this with a new 8Gb unit with 2 folders installed (sys and user) - previous version of the firmware copied into the sys folder and it booted fine. Was then able to upgrade to the very latest firmware. Worked fine after this - now fully functional. T…
-
How do I gain access to the internal hard drive ?
-
Thanks for the rapid response. Did you say there is an internal drive (in other words an on board storage facility) built into the printer?
-
Hi - Flashforge Finder will not print - seems to do everything else(loads filament, extrudes test filament, connects over wireless and USB to the point I can operate jog mode successfully). But when trying to print either wireless, USB cable from the PC or USB stick directly into the printer it simp…
-
My advice - upgrade to Z-Suite 1.6.1 - free download - this should resolve your issues.
-
Cheap compared to others - but then I am a large Location - Birmingham UK - any suggestions would be much appreciated.
-
To clarigy - I’m in the UK - looks like we have responders from the US - different type of market - anybody from the UK having problems?
-
Work flow has tailed off to zero - is anybody else suffering in the same way?? I don’t believe I have done anything wrong but work has completely dried up - any advice??
-
Matter of interest what was your previous printer?
-
Photographs would be useful
