-
Good to hear you’ve got good experiences with it @keebie81! We should be over and running tomorrow… exciting
-
To our 3D Hubs community, Over the past 5 years the Talk online 3D printing community has grown a lot. In fact, we have grown so much that we have completely outgrown our current forum tool. That’s why we’ve decided to move to a smarter, more intuitive, more feature-rich, and more scalable system p…
-
I received an order request at 12:25am. It is Sunday. I then received an email from 3D Hubs at 4:26am requesting for a response and saying this will improve my hub ranking, implying that it would decrease my hub ranking if I did the opposite, to not respond within 4 hours. I received these emails a…
-
I have refurbished a couple of Replicators and made new key pads. If you have the same problem with malfunctioning buttons you may contact me. [img_20171114_174821.jpg]
-
Hi Josef, We are aware of this and are working to figure out a solution. We initially thought this should be a fairly simple feature. However, given our global reach, we need to build something that understands localized time changes (i.e. PDT -> PST) and then translate these to other time zones if…
-
Hi guys, My apologies, we are currently experiencing an issue with this system. Our developers are looking into the issue and it should be resolved soon. Best, Maddie - 3D Hubs
-
Sometimes they have a valid reason for multiple orders. Some that I have seen are - Want to have a sample from few different hubs before making a big order with one - Have a tight deadline and know that a few hubs will need to each print part of order - Making something with multiple materials. …
-
Your profile on you hub says “One of first Hubs to be established in and around Chennai City with over a hundred satisfactory prints delivered” but your comment above says only 5 orders. So is it a lie on your hub page? Your bad review also probably isnt helping. Are there other hubs in your area w…
-
Any plans to retail in the US soon, maybe through a reseller like Matterhackers?
-
Hey @Iceman24k, good questions! Here’s what you need to know: 1. Your printer is either listed as online or offline (controlled by you) in our system, so even if you have an “active enquiry” from someone, that won’t affect your hub listing or preference. You’ll still show up the same in searches (a…
-
Swap Endstop cables to see if the problem moves to the other endstop. It is most likely the cable or the endstop has gone bad.
-
Designs where the bed moves for the y axis are my favorite but you start to run into problems as you scale up. No matter how big you scale the machine, the extruder stays the same weigh which means the mass moving back and forth in the x axis stays the same. However, every increase in scale for the…
-
Is that for sure using the actual response time on 3d hubs? Or could it possibly be hard coded into the bot to say that, as 52 hours would be a couple days. I’ve noticed that on my hub it says in my dashboard that it would appear as ‘within the hour’ but on my actual hub it says two hour response ti…
-
For strength, ABS is a good choice. Printing holes that small is a challenge and will require some iteration to get them just right on the printer. The best thing to do is to print the part to nominal and then run a 200 micron carbide drill bit through the holes. This reaming process will ensure con…
-
Hey! Thanks for your feedback on the competition. In order to maintain the fairness of the competition and its entries, the winners will be chosen by a selected jury of Ultimaker and 3D Hubs team members. The judging criteria will still be the same: the most innovative design on Star Wars topic. Do …
-
Judging Criteria Update: Together with Ultimaker we saw the issues in the upvoting system for the design entries. For this reason we’ve changed the judging criteria system from upvotes to a jury, which will be composed by Ultimaker and 3D Hubs. The winner of the competition will be declared on March…
-
I agree with you, my Darth Vader is really ugly (and don’t even think about what’s under that mask), focusing on a low-poly style limits what I can do with my designs, and 3D printing has some limitations too. The final result is usually what it’s left after solving the low-poly and the 3D printing …
![[img_20171114_174821.jpg]](https://www.3dhubs.com/talk/uploads/db5060/original/2X/f/f72c545ad1a2241435705e06f4deba436ed58533.jpg){kind=link}