I do see an issue with people entering a tonne of previously made designs, as it gives newer designers little chance to compete.
If I had created the comp (I wish…) it would have been the following criteria:
1. The model must be created for the comp (otherwise we’ve seen it all anyway - if you are into 3D printing chances are all of these are not new)
2. Only 1 entry per person.
3. Winner decided soley by 3DHubs and not how many friends you can get to come and upvote you.
Good to see they got 1 out of 3 right so far. Here’s hoping for the next comp.
2 Likes
hi everyone just got my prints back from a very kind friend of a friend with a printer so here are my luke and vader mini figures I’m entering for this contest that I designed on tinkercad. this is link
https://www.youmagine.com/designs/star-wars-luke-and-vader
8 Likes
yoda3d
83
Hello,
I would like to enter the competition with this model:https://www.youmagine.com/designs/head-of-yoda-a95a8e4a-146e-41c5-978e-c1c1c217fbed
Head of yoda that I modeled and printed .
I wanted to make a model that is detailed but easily printable.
Printed without support.
May the force be with you:)
yodaprint.stl (24.4 MB)
3 Likes
yoda3d
84
Hello,
can we present several models?
- YouTube My last update about the project 
1 Like
One of my favourite Star wars characters is Count Dooku, especially the Clone Wars version, and I have been wanting to sculpt one for a while now, so here it goes. It was 3d sculpted using ZBrush and 3d printed on a Zortrax m200, then Hand painted using Vallejo paints!
The project was supposed to be a study after the original sculpt of Darren E. Marshall a challenge to see if I can make it look as close as possible to the original and a huge desire to have that sculpt in my office, I ended up learning so much from this project.
Make sure to check out my Blog for the entire project walkthrough
http://www.pixelophy.com/2016/03/count-dooku-study-sculpt-and-3d-print/
Merged_Dooku_120mm.stl (69.7 MB)
4 Likes
Daam
87
Hi, I finally printed my design for this competition, I did a little Ewok head to support my Wacom pen, you can also find a version without the hole so you can modify it the way you want.
Here’s the link to youmagine : https://www.youmagine.com/designs/ewok-head
ewok.stl (29 MB)
ewok_wacom.stl (20.5 MB)
3 Likes
Hi guy’s!
My entering for the competition is a designed by myself lightsaber. I wanted to do something different for this competition since it is my dream to one day work or participate in a star wars movie or project. The lightsaber consist of six printed parts and takes a total of four hours.
Design is my passion, with this idea in mind I’ve designed a lightsaber thats easy to print and very easy to assemble. So if you like it give me a thumbs up and the force will be forever in your favor!
The following link leads to the YouMagine page:
https://www.youmagine.com/designs/lightsabre
May the force be with you, always
deel1.stl (67.7 KB)
deel2.stl (45.4 KB)
deel3.stl (78.3 KB)
deel4.stl (40.3 KB)
deel5.stl (22.7 KB)
kern.stl (14.1 KB)
21 Likes
Looks great!
Although… if your Zortrax is gathering dust I don’t think you need a new Ultimaker 
Thanks!
Do you think the sole reason to enter a competition is to win? I’m here to learn, share my experience, meet new people, promote my blog, promote my hub and I can go on… and when I wrote that my “Zortrax was gathering a bit of dust” I was trying to prove a point, maybe I was to subtle (I’ll try better next time). I really hope you entered the contest and I really hope you win the Ultimaker this way you can stop worrying about people having too many 3d printers in the shop!
1 Like
That looks awesome! Are you thinking about post-processing/painting it as well?
Lol it was just a joke. Who knows, you might have needed some more filament too 
ill enter at some point, I was just trying to make something specifically for the competition rather than using an old model.
1 Like
Lol it was just a joke. Who knows, you might have needed some more filament too
ill enter at some point, I was just trying to make something specifically for the competition rather than using an old model.
I created this 3D Printed BB-8 droid!
It is motorized and remote-controlled to move around and interact.
I’ve made the design in SketchUp, It’s printed half-size so it doesn’t take tons of filament. The robotic platform is Arduino-based so you can add programmable LEDs and sounds.
The video is here: https://www.youtube.com/watch?v=ONnFEvNyB_g
Enjoy!
4 Likes
First my idea was too large and too little time to implement, so I said that the size dosn’t matters and I focus on utility. Too soon I have a ball and decided to make cufflinks for my shirt. I am a fan of Star Wars so of course the cufflinks will be the theme in StarWars. They have been printed with a layer 0.15 in ABS. Everyone knows that the biggest problem is just the smallest prints, so it was this time.
I hope that someone like them and surely someone will use them:)
Cheers
falcon_clip.stl (8.2 MB)
title_clip.stl (164 KB)
yoda_clip.stl (18.2 MB)
3 Likes
Hey ! I am glad you like it 
I don’t really have time for that these days, but maybe after the competition.
My painting skills are not so good, so my model might look very ugly after.
Hello Simona,
I understand that the deadline on March 21st but is there a cut off time? If there is a cut off time, please let us know the time and time zone.
Thank you!
Wes
My friend and I decided to make the map to Luke Skywalker from “The Force Awakens.” Then we took it a dozen steps further.
To be clear, we didn’t print the map itself. We printed the flash-drive-shaped object that BB-8 carries around, but with space to fit a real flash drive within it. With this, we came to realize, “What good is a flash drive without a USB port?”
So then we printed a Star Wars themed USB port with over a dozen 3D printed PLA parts. The port is complete with a mechanical descending and lowering vertical port, plus a fully-functional mechanical iris door at the top. The Resistance can finally read USB drives.
Check it out:
4 Likes
Hi Simona,
Is there a specific cut off time on March 21st? You mentioned that the winners will be decided on March 21st so there must be a cut off time in order to give the Ultimaker / 3D Hubs team members enough time to go through all the submissions and decide on the winners.
