Go to homepage
100 / 180
Mar 2016

Here is the screen accurate Cosplay prop of the Storm Trooper Officer Pistol (SE-44C) I designed and printed. I originally designed this for the 501st Legion but decided I’d also enter it into the competition!

There are to many parts to just upload them to the post so here is the link! I’ve attached an image showing my print next to the actual screen prop picture.

Dont forget to follow me on facebook and instagram if you like what i do

Facebook: Redirecting... 1

Instagram: @mo3d.printing

I do see an issue with people entering a tonne of previously made designs, as it gives newer designers little chance to compete.

If I had created the comp (I wish…) it would have been the following criteria:

1. The model must be created for the comp (otherwise we’ve seen it all anyway - if you are into 3D printing chances are all of these are not new)

2. Only 1 entry per person.

3. Winner decided soley by 3DHubs and not how many friends you can get to come and upvote you.

Good to see they got 1 out of 3 right so far. Here’s hoping for the next comp.

Hello Simona,

I understand that the deadline on March 21st but is there a cut off time? If there is a cut off time, please let us know the time and time zone.

Thank you!

Wes

My friend and I decided to make the map to Luke Skywalker from “The Force Awakens.” Then we took it a dozen steps further.

To be clear, we didn’t print the map itself. We printed the flash-drive-shaped object that BB-8 carries around, but with space to fit a real flash drive within it. With this, we came to realize, “What good is a flash drive without a USB port?”

So then we printed a Star Wars themed USB port with over a dozen 3D printed PLA parts. The port is complete with a mechanical descending and lowering vertical port, plus a fully-functional mechanical iris door at the top. The Resistance can finally read USB drives.

Check it out:

Hi Simona,

Is there a specific cut off time on March 21st? You mentioned that the winners will be decided on March 21st so there must be a cut off time in order to give the Ultimaker / 3D Hubs team members enough time to go through all the submissions and decide on the winners.

+1 for NEW DESIGNS. Seems like someone is downvoting people all around and put you into the negatives. I really hope the judges totally neglect the votes. It’s creating a bad aura for the entire community.

I can’t promise it will be fantastic, but I can promise it will be a new model and not something that was an old project that gets thrown in the hat.

At least i am honest i did not make all 3 of them, made 1 of them and altered the others to fit bottles to be part of my whisky collection…

Hi to everyone this is my entry

It’s a R2D2 working with Arduino.

I will keep updating the design (electronic stuff) because many parts are coming in theese days.

Hope you like it.

Why are people downvoting new designs and upvoting old ones who should be disqualified? BAD 3dhubs, bad!