MakerBot

No category

May 3, '17

yeah thanks guys i fixed it i used ccleaner

ctc clone makerbot power supply

3D Printers

Apr 24, '17

is it a full guide what value is the resistor

FlashForge Creator Pro 2016

3D Printers

Apr 24, '17

too hot i have a ctc makerbot clone with a homemade enclosure and i print abs at 205c with a fan on for small things and 210c for big and the bad at 100c to 110c and abs juice is amazing and for pla lower the bed to 40c to 50c and use a fan blowing at the nozzles works for me but you may have to twe…

ctc 3d printer firmware update

3D Printers

Mar 20, '17

no but there is a Trace that gose to a chip leg if you look the thing is i was looking for I was looking for tutorials on updating me printer and i found someome on redit saying the reset button time is bad and 6 hours is two long and someone sed put a cap on c20 and the timimg has no issues press 1…

ctc 3d printer firmware update

3D Printers

Mar 20, '17

i can see c20 on your pic

ctc 3d printer firmware update

3D Printers

Mar 20, '17

so I’ve been doing some research to get the reset button on the back working I have a picture of where the caps go I think will there be anybody to tell me if I’m right and if the value is right [ctc_mightyboard.jpg]

ctc 3d printer firmware update

3D Printers

Mar 15, '17

found this video - YouTube

ctc 3d printer firmware update

3D Printers

Mar 14, '17

the button on the back of the printer is not doing anything so will not update

CTC right extruder temparature constantly rising.

3D Printers

Sep 12, '16

your lucky mate i blow the temperature sensor IC on my pinter i am lucky i can solder you have to be careful with these printers becouse there is no import protection and 24v is bad for 5v IC

CTC right extruder temparature constantly rising.

3D Printers

Sep 12, '16

this is what you need http://www.ebay.co.uk/itm/5Pcs-10-C-500-C-3D-Printer-Kit-K-type-Temperature-Sensor-Ring-150cm-59-1-/232050470361?hash=item3607492dd9:g:cEEAAOSwMtxXsyYF

CTC printer, no power

3D Printers

Sep 9, '16

that sounds bad its so easy to mess up card reader i did with my one had to buy a replacement one http://www.ebay.co.uk/itm/231978767836?\_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

ctc enclosure

3D Printers

Sep 7, '16

if you want to print abs which is the most common plastic that we use today so to print it you need high temperature or your work pace wan’t stick

CTC door enclosure

3D Printers

Aug 24, '16

sorry seal the door lol

ctc enclosure

3D Printers

Aug 21, '16

magnets is a Great idea thanks

ctc enclosure

3D Printers

Aug 21, '16

this is how i did it thanks for someone giving me a idea on here i used a 16 litre box cost me £7.49 from ebay [CTC top 1.jpg] [CTC top 2.jpg]

ctc enclosure

3D Printers

Aug 21, '16

16l litre box from ebay but you have to cut it

CTC Thermocouples

3D Printers

Aug 2, '16

i no its a k type when it stops working or stops reading it makes a sound and tell you on the lcd error 4# this is what happend to me

CTC Thermocouples

3D Printers

Aug 1, '16

what error on the lcd is it 4# or 1#

Possible Da Vinci repair parts.

3D Printers

Jul 29, '16

hi how come you are looknig for a new board maybe can be repaied put a pic on of it

Turning my 3D printer into a CNC Mill

3D Printers

Jul 16, '16

can I be honest with you if was me I don’t use anything on build anything that reliability just don’t think it would be reliable enough it is designed to have no load a lot of 3D printers are made of plastic so adding a load to will result in failure my you well get a week or 12 mouth but at some …

Turning my 3D printer into a CNC Mill

3D Printers

Jul 16, '16

I didn’t imagine that the chassis would be strong enough but if you got it to work thats cool m8

Turning my 3D printer into a CNC Mill

3D Printers

Jul 16, '16

what you wan’ting to cnc

extrusion problem

3D Printers

Jul 15, '16

there is only two size as 1.75mm 3mm of filament i have seen

BEST MATERIAL FOR GO PRO MOUNTS?

No category

Jul 14, '16

is it better to buy one as gopro are £200 http://www.ebay.co.uk/itm/4x-Flat-Curved-Helmet-Mounts-3M-Adhesive-Pads-for-GoPro-Hero-1-2-3-3-4-Camera-/122009627147?hash=item1c68572a0b:g:rr4AAOSwLnBXV~ue

extrusion problem

3D Printers

Jul 14, '16

bort this as well http://www.ebay.co.uk/itm/40-teeth-Stainless-Steel-Extruder-Drive-Gear-for-3D-Printer-1-75mm-Filament-/191596093812?hash=item2c9c046174:g:DjQAAOSw3xJVcuhv

extrusion problem

3D Printers

Jul 14, '16

yeah i was getting prints you was but now better give it a go for £2.50

extrusion problem

3D Printers

Jul 14, '16

this is my extruder [100_1295.JPG]

Buying a 3d printer soon. Anything I have missed?

3D Printers

Jul 14, '16

i bet you this is a better printer then that LulzBot TAZ6 3D Printer Unboxing, Setup & First Print | James Bruton - YouTube this cost £1200

extrusion problem

3D Printers

Jul 14, '16

hi max are you using ptfe tube my ctc printer works alot better with the tube http://www.ebay.co.uk/itm/282032540144?\_trksid=p2057872.m2749.l2649&var=580981700166&ssPageName=STRK%3AMEBIDX%3AIT

help stop working

3D Printers

Jul 7, '16

so i have a update so I will this blow this chip up MAX6675ISA sop-8 i put 24v in when its 5v by just cleaning printer nozzle then it gets better bort some new hot ends and thay are 12v lol [Free-Shipping-10PCS-lot-MAX6675ISA-MAX6675-SOP8-font-b-temperature-b-font-to-digital-font-b.jpg]