-
Gezocht: Medewerker 3d-werkplaats tevens begeleider gebruikers van de 3d werkplaats De UNIT Academie (unitacademie.nl) heeft sinds begin 2017 een 3d werkplaats. Ter ondersteuning van onze werkplaats en het begeleiden van onze deelnemers, zoeken wij iemand freelance, parttime, voor minimaal twee da…
-
My expectations are high since I am already using 4 Ultimakers and used to their quality so I ordered one from @Makerpoint. The price I believe should be worth it but I will let you know how I feel after I have tested it
!
Happy printing! -
Done!
-
I would go for the Zortrax M200. It is more a system than a printer. It includes software, material and printer. Specifically the way it handles support is very nice! If you print with ABS get the side covers as well, especially if you plan to print bigger parts. The only downside is that it always …
-
Hi @yowhwui, very good idea but maybe Zortrax can implement it in the firmware? Interested to know your findings! I have not noticed a nozzle blockage yet and have also used all of their filament. Total printing time +/- 350 hours. (unfortunately I am not printing with the Zortrax at the moment …
-
Hoi Frank, TOP idee maar we zijn op 2 februari al in Amsterdam geweest. Heel veel plezier op deze leerzame avond! Met hartelijke groet, Guy
-
Hoi Matthieu, mocht je nog niet zijn voorzien dan heb ik een Ultimaker2 voor je. Key23D zit in Elst Gld. Je kunt me rechtstreeks bellen op 06-10276387. Met hartelijke groet, Guy
-
Hi Glen, could it be that something is blocking the movement of the printed? Maybe a belt tensioner or something? Kind regards, Guy
-
Hi Frank, great idea to invite Hubs for this event! I will be there and bring some stuff along with my girlfriend
!
I am also interested in the 3D printing of concrete!
CU then!
Kind regards, Guy -
Good work Sam!! Congratulations and keep it going!! I have the same experiense so also thumbs up for 3D Hubs! Kind regards, Guy
-
Hi Guys at Fargo 3D, I can only say the same about your site!! Looks great!! Keep up the good work and it’s very nice to know that there is a similar company on the other side of the world
!
Kind regards, Guy -
Thanks @Fargo3D !
-
Hi Filemon, attached is a screenshot of my homepage http://www.key23d.com with the widget! Thanks! Kind regards, Guy [Key23D-Home-page.jpg]
-
Hi Sergio, I am in Elst near Nijmegen but I am sorry I don’t have an extruder (yet). Maybe you can build one? Or Find a FilaBot. Or maybe 3D Hubs can lead you to one? @luukgerrits Kind regards, Guy
-
Hi Enrico, I participated in the Peachy printer Kickstarter project and I will let you know what I think of it when I have received and tested it. By the way, the $100 is only for the structure with the PCB, mirror and laser! Kind regards, Guy
-
you will need a 2 mm hex key. Kind regards, Guy
-
Hi Barry, welcome to our wonderful and exciting community!! You will defenitely like it and I hope to meet you soon! Kind regards, Guy
-
thanks Brian!
-
some very nice performance features have been added to the Hub page. What does the AVG POS. exactly mean? How is it calculated? [My_Hub___3D_Hubs_0.png] Kind regards, Guy
-
when you fix this is it possible to also bring back the drag and drop feature? I now have to export the pictures from e.g. iPhoto to disk first before I can put them on the order page! Can you also change the editor I am typing this message with? When you type the first line and do a CR you end up …
-
I can’t agree more @Filemon ! Happy New Year and 3D Printing! Kind regards, Guy
-
Good work team!! Congratulations and keep on growing!! Kind regards, Guy
-
Hi Guys, this realy is a wonderful idea!! By the way, who says you have to stick to cars?!?! I’m excited and ready to be a part of the action in January! Enjoy the Holidays! Kind regards, Guy
-
I wish you all a Merry Christmas and a very happy and prosperous New Year ! Kind regards, Guy [IMG_3141.jpg]
-
Thanks @universalist for the good idea, your work and sharing! I will check it out when I found some time
!
Unfortunately there are 10 designs.
Kind regards, Guy -
Hi Ahmed, I don’t have either machine so I don’t know what’s best for you. I do have a couple of Ultimakers but with only one extruder. I am still experimenting wit a second extruder on an Ultimaker Original but due to lack of time I can not share the results yet. I also have a Wanahao Duplicator…
-
Hi Conrad, maybe this is of interest to you? http://www.qed.eu/3dprintingmedical kind regards, Guy http://www.qed.eu/3dprintingmedical Challenges and Possibilities for the Medical sector 4 November 2014, 14.00 - 17.30, registration and welcome coffee from 13.30, Press Club Brussels Europe, Rue…
-
Hi @scotydale, seems possible to me. At the moment I unfortunately have no time to look into this so hopefully @Christian_CAD can help you out! Would like to know the result though! Kind regards, Guy
-
Hi Greg, I didn’t experience this problem so I don’t know if there is anything else, apart from the changes you already tried, what could cause this. At the moment I don’t have time at all to “dive” into this but when I have any idea I will let you know. Kind regards, Guy
-
Hi Conrad, sorry! No experience in this field but I will keep my ears and eyes open
!
Kinde regards, Guy
![[Key23D-Home-page.jpg]](https://www.hubs.com/talk/uploads/db5060/original/3X/2/7/2716cc7e24bb8f370fdd3632031a9c1608b04bae.jpg){kind=link}
![[My_Hub___3D_Hubs_0.png]](https://www.3dhubs.com/talk/uploads/db5060/original/2X/6/6ef817bbbb136c519fd7c740d08f20f633e276c9.png){kind=link}
![[IMG_3141.jpg]](https://www.3dhubs.com/talk/uploads/db5060/original/3X/3/b/3b5a4314bf51f07c1393b67c3dd7d21eccdb8641.jpg){kind=link}