-
Hey all, I’m trying to print a 154mb file on a delta wasp 2040 and nothing is happening. I can print other files fine, I’m wondering if theres a max file size limit on the machine or if anyone else has had this issue? The screen reads as if its printing but nothing else changes from when I select…
-
Hey Gidget, I can email you with and some photos if you know how to pm through this site? You jumped at the new version same as myself. In comparison I spent weeks straight on the V1 and wet “peanut butter” mixture to achieve large detailed prints, still with around 25% failure rate, but I recon th…
-
Glad you got it going, can be a very frustrating proccess to get the balance right in my experience, due to the nature of the material, but yea, when it works its worth your while.
-
If you email WASP support they will explain how to uypdate the firmware to get it rotating the correct direction, but if you also have the V1 extruder like I do it will make that one rotate the wrong direction, the alternative being to swap two of the cables coming into the motors head around…this w…
-
Hey Domenico, I’ve found myself that the small pinch bolts on in the tension coupling can become seized and need a lot of force to unfree them, my second extruder delivery had that issue and I though they’d welded it together or somthing but yesterday it did come loose in the end, try some adding w…
-
Hey, no I’ve not experience that yet, but a good point to now consider in my deigns is to try and avoid potentially sealed up air pockets. Maybe it could be done by modeling in an air flow channel through the infills leading out to a less noticable area so theres no sealed off areas for pressure …
-
Hey Christian, I though the same and bought some tips on ebay, arrived today and they look to be the same standard. I paid about 30euro for a 21 pack, including delivery. So expensive but hopefully they will work well. All the best.
-
Hey Chrisitan, alcohol wise I bough some ethnol to use in the mix but havn’t tried it yet, it can be expensive depending on what its labled as (either for industry “ethol” or a high percentage drinking alcohol works too), I think its all the same for our purpose, I used vodka and water before with…
-
Thanks, Jonathan Keep’s videos are great although I’d not seen one involving a rabbit yet, I’ll check for that and his mixture ratios. Nice one.
-
Hey Gidget, brilliant…thanks so much for that info! I’ve spent the day on it and didn’t have a printed instruction manual so tomorrow I’ll try your soloution, sounds good. Thanks again on the secret sauce recipe, I recon you’ve saved a few people a lot of time sharing those tips, it gives me confid…
-
Hello, great to see someone has found a balance for getting smooth prints out of this setup, its hard to find information on using the clay kit correctly… I’m currently beginning the proccess myself and have a few questions if you don’t mind. On the WASP setup video for the clay kit it shows the …
-
Hello All, I just receved delivery of my 2040 yesterday, hoping it’ll prove a good investement, I’m new to using these machines and would like to know where to find the best support/tutorials for it, any suggestions? ~The problem I’m having is trying to print the honey comb braclet test file supp…
