Skip to main content
15 results for@chanman #no-category
Advanced filters
Relevance
Relevance
Sep '17
-
There is not much you can do to correct the "left" side, the model is printed with the knob away from the bed so basically the "left" side is being pri...
Sep '17
-
Not much for SLA material, but polycarbonate has good transparency to IR and can be printed ff printers.
Jun '17
-
Check your belts
Jun '17
-
WOW, got to go find a cheap dehydrator now to play with. I have some filament that gave me the same finish you got with the bumps.Thanks for the info.
Apr '17
-
I had a similar problem with my Rep 2. the cause is that the heat from the extruder is getting into the filament and softening so the gear does not adv...
Apr '17
-
Scanning will not get you a model that you can print and function, If you scan in the orientation of the left photo, you will not get the internal stru...
Apr '17
-
Try the Purple Elmers glue stick to enhance the adhesion of the filament onto the aluminum surface to get the print started.
Mar '17
-
What slicer are you using? if makerware, you need to change the printer to a 2X to get the heated bed setting. You can also use Simplify3D to give you...
Mar '17
-
I had this happen to my rep 2 and after changing nozzles, changing settings and it turned out to be the cooling fan on the extruder was put in backward...
Mar '17
-
Just do a File / Save As / and pick STL as the format
Mar '17
-
There are a number of sheets that you can adhere to your print bed that will make the parts stick better. BuildTak, Fleks3d and LokBuild surfaces are s...
Feb '17
-
Check the nozzle height. Do a bed level process and slip a piece of copier / white paper in between the nozzle and the bed. There should be "some" pres...
Dec '16
-
Yes, that is it… just use a couple of zip ties to put back on.
Dec '16
-
For joining the glass, go to a pet store and get the aquarium silicone adhesive, basically, draw a bead on one edge and put the second sheet of glass i...
Apr '16
-
PLA natural is translucent to shine like a light, it will depend on the brightness of the LED that you use if you want it to work as a lamp.To allow mo...