Skip to main content
13 results for@amorton12 #3d-printers
Advanced filters
Relevance
Relevance
Oct '16
-
I got mine way back, just after the V1 first came out, and while I never had any serious problems with it, I did perform a few upgrades that greatly in...
Feb '16
-
The major items have been mentioned, but I'll summarize with some commentary: 1) Bed leveling: home the z axis, unlock your steppers, and move the prin...
Jul '16
-
The stock system is capable of excellent resolution and speed, you just need to calibrate and tune it. If it's not working, either you're calibrating i...
May '16
-
This can also happen if you are overextruding too much. Check your filament diameter with good calipers, and check the extrusion multiplier setting in...
May '16
-
-EDIT: I had no idea these things come with Build-Tak now. It used to just be this giant metallic sticker at the top of the bed. Probably better to rem...
Oct '15
-
Two possibilities: If you are using glass on the bed, you have to move the Z endstop switch up. The later models have a second hole that makes this ver...
Feb '16
-
If it looks centered in the slicer, then your print bed size is not defined correctly - it is set too small.
Feb '16
-
Others have pointed out that it is missing steps, but I'll explain a little further: The machine depends on the movement of the print head being predic...
Jan '16
-
The i3 is very finicky with S3D because of the startup timeout. I fixed mine by disabling the auto-reset jumper, but TBH, it's more reliable to just pu...
Dec '15
-
Google Translate yields accurate and usable instructions. It basically walks you through a PID auto tune and shows you how to get your machine's PID pa...
Dec '15
-
You might be overextruding. Check your filament diameter and slicer settings for extrusion multiplier. Try doing a 100% infill 20mm test cube and see i...
Dec '15
-
It looks like you might need to tweak the flow rate and starting height for the initial layer to correct the problem with the bottom. It's tough to tel...
Oct '15
-
I have been through 3 or 4 different ones now, and this is the best one I have used so far: https://www.thingiverse.com/thing:1025471 thingiverse.com h...