-
…believe it or not …I did read somewhere that cleaning the sd slot with compressed air could help…so the stops could been caused by problems with reading the SD card…I did simply blow a few times into the slot - avoid spitting - …and the dammed printer is working without problems since yesterday now…
-
https://www.file-upload.net/download-12574761/WhatsAppVideo2017-06-27at12.50.00.mp4.html For whatever reason the ultimaker II Extended stops in the middle of a print. Does anybody have an idea? After the last dozend of problems everything worked fine for the last days…this is new and I dont know wh…
-
Okay, after endless hours I got it …It was a Problem with the cable connector to the sensor at the heat bed…from tome to time the Connection was disturbed by movement of the cable…I soldered it and now that Problem is solved for some days. [ultimaker_senso_heatbed.jpeg]
-
The replace bed and heat sensor are originals and not half a year old. I checked the wiring, which is fine. What I dont understand is the context of the stepper motor for z axis and the temp sensor…nevertheless I checked with the supplier of the heatbed and I can change it. Hope that will help. T…
-
Hi, thanks for all your help! I have to restart a few times…sometimes 5 x new start…til the bed is going up without the crack noise and the error message. Sometimes when switching on, the error message appears directly without showing the ultimaker logo, then I disconnect the power, turn on and of…
-
Does anybody know what causes this crack noise at 02:00 and the upcoming error message? The heat bed is a new one… resistance is measured and fine. Any help welcome! I have to switch off and on a few times, then its working This click sound sounds like missing steps of the Z Axis… https://www.you…
![[ultimaker_senso_heatbed.jpeg]](https://www.3dhubs.com/talk/uploads/db5060/original/3X/1/2/122f405643588eab98e99840c74d56ac04a1fc49.jpeg){kind=link}