-
I finally returned the machine because it does not work properly. the swindlers of the official reseller ROJO3D do not want to return the amount paid to me. I’m going to trial with them.
-
Thanks Typer your help guide to me to resolve the issue. The problem its that machine works with 3mm at factory defaults, but local provider set to 1.75mm… they didnt say to me that, and when you talk about it… i use m503 command to see all parameters, and se it says M200 D3… I search for M200 (im …
-
Typer, with your config, but with 20mm/s and 2mm for retraction (i have 1.75 filament) calibration cube prints ok. Good definition, good size… but then ill try to print a bigger model. And clog again 5 times… in total print of 4hs… i stay at side of machine, and didnt figure whats happening… I also…
-
Thanks again. Ill try with your parameters now in createware, i cant make simplify3d works… i didnt understand how i set machine parameters, and i cant download a configuration file for mi machine. The two biggest problems are that the filament, especially the SILK, after a few minutes clog the no…
-
Hi, thanks for your answer. I trying to print with differents types of PLA. I change a lot of parameters… Temperature from 190 to 220 Flow 90 to 110. Z off set from non adderence to nozzle plugged. I have a lot of problems… Thickness of each wall its different. Expected 0.4 get in same cubre…
-
Sorry, could you solve the problem? i buy my first 3d printer last week. Its a createbok DE Plus, and im having the same problema. Sorry for my english. Im from Argentina.
