-
My problem has been only with custom prints. In certain areas filament isn’t coming out of the nozzle. I’ve cleared the nozzle numerous times. Also filament is being dragged. HELP!!
-
I have a problem with my printer where the filament isn’t being put down all the way. I think it maybe the nozzle is clogged. I’ve included a picture [img_01681.jpg]
-
I am using PLA as my filament. How could I fix the gear then??
-
I have the temperature at 200 degrees. There is no missing steps. But there is a clicking noise coming from the area where the filament enters the gears.
-
On my printer in certain places the filament isn’t being put down 100%. I’ve included a picture. Does anyone know what is the cause of this? [img_0101.jpg]
-
I want the prints not to have any water in them at all. I want them to last for a long time
-
I am printing items that will be used outside and I wondering what is a good way to waterproof items that are made from PLA.
-
Yes I sliced them
-
Does anyone have more info?
-
What I do is load the item from Cura and adjust the size to my liking and put it on a chip to my printer
-
Certain files print solid. Meaning without holes. The files include the default file and a foregrip
-
I use Cura as my slicer and the material I use is PLA. In regards to the speed the speed hasn’t been changed
-
Yes a couple prints have come out correctly
-
Here is the pictures. [img_0081.jpg] [img_0079.jpg]
-
I’ve been printing for 6 months now and I’ve had this problem since the beginning. When I prints off of Thingiverse the prints have holes in the left side of the print. Does anyone know why this is happening and how this can be fixed.
-
Gaps are appearing in the the first bottom layer. Meaning the first half of the actual print. Do I calibrate the bed by adjusting the screws? Thanks for the help.
-
My printer has a problem. It has gaps in between each filaments thread. In my experience there should be no gaps at all. Does anyone know what might be the cause of this problem?
-
No I’m not running Marlin Firmware. No I haven’t done any work with the Arduino development environment.
-
I’m using a Monoprice Printer, It isn’t a Delta printer.
-
I looked through all of the folders where is it located?
-
How do I make it normal?
-
Yes, prints have come normal up to this point. But how do I do what you suggested?
-
I printed a Fallout back plate for a phone dock I’m printing. The words came out backwards. I loaded the print on Cura and the print seems to be normal. Does anyone know why this is?
-
Problem has been solved. Try changing the programming.
-
It’s a metal plate. I did use alcohol on it and works great.
-
I’ve been using Painters tape with my printer. But the tape won’t stick to the work area. Any suggestions?
-
I got an Monoprice Select Mini 3D printer for Christmas and only have been able to print the default file that was on the SD card that came with the printer. When I try to print other files it seems to jam. How can I fix this??
![[img_01681.jpg]](https://www.3dhubs.com/talk/uploads/db5060/original/3X/6/f/6f1f9e9704dbd0aa82fd106fe351d5c47cb63608.jpg){kind=link}
![[img_0101.jpg]](https://www.3dhubs.com/talk/uploads/db5060/original/2X/6/6730bb766fc5e4a151eb310591e735b25998a57b.jpg){kind=link}
![[img_0081.jpg]](https://www.3dhubs.com/talk/uploads/db5060/original/3X/3/5/353283d37a3be2f18d17db88219fbe1632403f01.JPG){kind=link}
![[img_0079.jpg]](https://www.3dhubs.com/talk/uploads/db5060/original/3X/c/1/c1f057a32a5ff721b01851549498c675893ab83d.JPG){kind=link}