Flash Forge Creator Pro 2015 Vibrating blower fan?

3D Printers

Mar 1, '17

My fan is running smooth. Had the printer for 14 months now. Use it regular - not heavy duty everyday.

Can anyone recommend a removal bed for FFCPro?

Materials

Jul 28, '16

I also use glass and hairspray, when the print cools off to room temp it normally cracks off by itself. If you are in a hurry get 2 or 3 glass plates. Then remove the glass and place clean glass on printer bed.

Dome top printing uneven

3D Printers

Jan 27, '16

I reduced the layer for the top and slightly increased the temp. The print looks better but not great yet. Will step up temp further and reduce speed also.

Dome top printing uneven

3D Printers

Jan 26, '16

I am printing a half-dome and get uneven surface at the top of the dome. The dome shell is about 2 mm and the dome is ± 90mm diameter. [20160126_064140-1.jpg] On my FlashForge Creator Pro I am using Simplify3D slicer and print with the following parameters: process1 (0 to 23mm height) 0.2mm ex…

Stock print surface replacement

3D Printers

Jan 18, '16

To remove the blue sticker heat the bed to about 80 degrees then it comes of clean.