UPET or (CPE) Warping really bad while printing?

Materials

Jun 19, '15

Oh yea sorry, I’m using UPET material or CPE filament from ultimaker and it came with my Ultimaker 2 extended which has a heated buildplate. I was previously printing with PLA and had no warping issues.I’m also using a gluestick for extra adhesion on the buildplate but still it starts warping about …

Printing Issues..

3D Printers

May 29, '15

It was really a result of all the suggestions above haha, I just had to turn up the heat, slow it down a bit, add more layers to shells, a few other things and im pretty happy with my results now, also just printed a new fan duct and installed with a breeze

Printing Issues..

3D Printers

May 29, '15

Thats where i did post this issue first but I have gotten way more responses on 3D hubs. Either way I think I may have finally got it down after a bunch of tweaking and trial and errors. Thank you everyone!

Simplify 3D (Printing Objects One by One)

Software

May 28, '15

Ahh okay I got it now, I was leaving it at 0, once changed it worked. Thank you!

Printing Issues..

3D Printers

May 27, '15

Alrighty I’ll try to raise the temp but i thought someone stated it was too high in regards to the photo

Printing Issues..

3D Printers

May 27, '15

Awesome…great guide thank you!

Printing Issues..

3D Printers

May 27, '15

OKay checked this possiblity but i dont think its the issue, game em all a nice tighten though. The ultimaker robot did fairly well but a little drooping on the bottom below the body

Printing Issues..

3D Printers

May 27, '15

Okay so after reading all the suggestions, here are all my settings with the changes mentioned. Please let me know if you see anything i can do different. FYI I am using PLA on a Ultimaker 2 Extended [1.JPG] [2.JPG] [3.JPG] [4.JPG] [5.JPG] [6.JPG] [7.JPG]

Printing Issues..

3D Printers

May 27, '15

PLA at 205, just changed to 200c to see if change occurs

Printing Issues..

3D Printers

May 27, '15

Yea i was thinking about making my own support but how? should i use solidworks or autocad and add like triangle supports or like you said double walls beneath my design or is there a way to import my own, i see the import option in Simplify3D but no idea where to begin

Printing Issues..

3D Printers

May 27, '15

My nozzle size is correct and the extrusion width was set to “auto” should i put manual and change it to 0.4 as well… its grayed out on (0.48) I also raised the layers to 6 on top and bottom because i need both faces to be pretty clean

Printing Issues..

3D Printers

May 27, '15

Im using the same 3d Printer so i will try your settings you mentioned, I’ll repost when i finish my print. Oh yea i think im running the extruder temp at 205

Printing Issues..

3D Printers

May 27, '15

No I can get the support on simplify, but the issue is in the picture, but after doing some tinkering i tried to add another shell to the surface layer if that would help?