-
Creality Ender 3 is very affordable and it’s the right choice. Try it and you’ll be completely satisfied. Enjoy
-
[ITA]Ciao, stampiamo con tecnologia FDM e SLA con 7 stampanti sempre online. Offriamo vari tipi di materiali, quali PLA, PET-G, ABS, ABS-X, ASA, PVA, TPU, NYLON ecc. Abbiamo una vasta gamma di colori e filamenti particolari quali legno, metallo pesante, magnetico, translucente, fluorescente, lumine…
-
Hi, it’s not a good practice. The upper part of the hotend will become very hot melting the filaments that could melt inside and get stuck inside. Perhaps it could be nice for ABS, but not for PLA.
-
Ok, now take a pic of Cura settings like I took it, to show me the offset you set, please.
-
Yes
-
If you align the object to print in the lower left corner of the cura bed… where the printer prints?
-
Read my previous answer on settings of cura…
-
Hi, solved?
-
Hi, Omar could You be more specific? When You start a print what happens?
-
I don’t use Cura for Afinibot A3, but Repetier-host and Slic3r. This solution permits to set the offset before the nozzle reaches the bed. I presume that in Cura You can try to adjust as need the value where i mark with a red circle. I don’t know if you have to use negative values… (it could be). M…
-
Here is… [img_0557.jpg]
-
I can see on the left of the carrier too much space between the carrier itself and the x-end stop. If A3 assumes that the x-origin point is for example 2cm at left of the bed it considers that the real start point is that… then you have to add a gap in x to correct it. Later I’ll send you some pics
-
take a pic of your A3 to see x and y axis
-
This is the configuration for my Afinibot A3. Do You match this? [cura15046.jpg]
-
Which version of Cura?
-
Hi, on the A3 (prusa) the origin (0,0) is at the left bottom corner (not at the center as Delta one). You have to do some actions to assure that all is well set… First of all tell us which version of Cura do you have so we can help You to set up it. Nice Valerio
-
Hi, probably You have a wrong size set for hotbed. open Printer settings and look at bed options. You have to fill correctly lenght and depth of printing bed (I assumed You’re using repetier-host). If you’re using only Cura, look at machine settings and set correct width and depth for your bed (A3 …
-
Please, contact me for details
![[img_0557.jpg]](https://www.3dhubs.com/talk/uploads/db5060/original/3X/9/a/9adcc50bd9153dde205a4e258bb20a7a10aa9ae2.jpg){kind=link}
![[cura15046.jpg]](https://www.3dhubs.com/talk/uploads/db5060/original/3X/0/6/066e5b9e193f71afe1967b87c4ceea3e09de7ec0.jpg){kind=link}