-
that help with it trying to go past the max x and y axis but it still digging into the bed and dragging across the bed. Could this be a issue with the firmware?
-
this also happens to be where the printer thinks 0 is for all 3 axis. [20161001_104643.jpg]
-
this is what came up when i ran it the way you said to. i also checked to see if i had a f5 board and i do will that be a problem. Attempting connection at \\.\COM5… Testing plaintext communication protocol… READ: ok Connected to machine! SENT: T0 READ: echo:Active Extruder: 0 Active Extruder…
-
so this is what came up when i ran the M119 command. [Capture_16.PNG]
-
yah so mine is the f5. so do i need to contact printerbot?
-
how would i check that to find out what version it is should the f5 be on the board some where?
-
thanks that really help. it stopped it from trying to go past the max x and y axis, but it still lowering the head into the bed. do you think this could be a hard ware issue?
-
so it seems like its not zeroing in the corner of the bed like it seems to think its doing. its more towards the center of the bed. how do i modify where the program thinks zero on the x and y axis is? i still have no idea why it keeps lower the z axis into the bed. i worried that this will break th…
-
what in the hardware could be causing this, would it be something wrong with thing chip or a part on the printer? i configured it to a printer bot settings i thought.
-
so i just got simply 3d for my printerbot simple metal. paid the 149 dollars and the first Marvin test print turned out great. everything else has gone to hell. when i try to print it makes out the x,y, and z axis on the sides with out safety switches. i am worried that its going to strip the z axis…
-
So i use a printrbot simple with hatchbox pla, printing at 195c with tape on the bed. the issue im having is that the raft is peeling off the bed. I have check multiple sites on how to resolve this but they keep saying use a raft. so how do i stop the piece from peeling when its there to prevent pee…
-
thank you for your help i really do appreciate it.
-
thank you for the information its been extremely helpful as to how to charge cost wise.
-
so i am planning on starting a 3d printing service here in Oregon and i am curios as to how much i should charge a job. i have studied several posts on reddit as to costs and pricing but i can barely make heads or tails of the equations they are using and it seems that every one uses a different cal…
-
so you would say its worth the price tag?
-
i run it directly off my computer, do you have opinion for matter control as a slicing software.
-
thanks for the info, so i am specifically looking for slicer software i can hook up to the printer and run it with. im also using hatch box pla filament online reviews say that its great but im still not sure. i have been working with matter control but i will look into simplify3d. thank you again f…
-
Hi I’m looking to start a 3d printing company, a good example would be imaker in England. that really the end goal. Right now i need help starting up here on 3dhubs, i have my own 3d printer and i have a good bit of experience do this for myself. The questions im looking to get answered are: what i…
![[20161001_104643.jpg]](https://www.3dhubs.com/talk/uploads/db5060/original/3X/b/a/ba7e7d3b191fbc62227b9ffe3dc636a5edd49a02.jpg){kind=link}
![[Capture_16.PNG]](https://www.3dhubs.com/talk/uploads/db5060/original/3X/9/7/97184a824dd0f195f44481880c970600f368ff18.PNG){kind=link}