-
so every time i try and change printer prices are add a material it wont let me click the “update settings” box. And most importantly it wont let me put my printer back online! this is driving me crazy lol anyone know how to solve this issue. Again my main problem is not being able to put my printe…
-
change the default extrusion from o(auto) to your nozzle diameter and you;ll see that part of the print is acutally connected to the inner side of the legs. I know that your post is a year old but i also know that with 3D printing you never stop learning.
-
Hey FYI adjusting the stepper drivers isn’t that hard but you do need a multi meter and another place you should check for help is the reprap mIRC channel. If you google reprap irc u’ll find a link that will take you to wiki and then another link to take you to the channel. If you need assistance ad…
-
Hey, first check to make sure all belts and pulleys are tight. Als make sure the print has isn’t wobbling then if that fails u may need to adjust the current to the stepper drivers
-
i think your going to need to get a couple different lights and leave them on for a few hours then measure temps. Then anything thats not hot enough to melt the PLA should be good…
