-
That’s a good idea. There would be a lot of overlap of course, as the restrictions are the same. I could maybe add a section to the current guide. @zymon Do you have experience with such projects?
-
The CR10 was also one of the top printers in our best printer guide last here: Best 3D Printer Guide 2023 | Hubs
-
The name is RhinoCAM
-
That’s a tricky question. I am not sure if Zbrush can export in a file format suitable for CNC machining. STLs are not compatible with CNC and you might loose resolution when you covert an STL into a STEP or IGS file (which most CNC machines like). I know that Fusion 360 also has a surface modelin…
-
I found an old post that seemed to describe a similar problem. You might find it useful:
-
Are all other stepper motors working properly? Double check that the pins are connected properly.
-
Hi folks, We just published an engineering guide to CNC machining that I am really proud of! It’s full of practical advice and amazing illustrations, like this one: [cnc-illustration-CNC_MILLING_WIDE] In this guide, you will find all you need to know to get started with CNC machining, including…
-
Hello everyone! I just finished writing an article with guidelines to help designers and engineers select the right 3D printing process. I hope this helps you communicate to your customers which process to select! Your feedback is most welcomed! I would actually love to hear your thoughts! > Her…
-
Hello everyone, The second introductory article to 3D printing technologies of the KB is now out. This time we took a deeper look in SLA. Here’s a link: http://3dhu.bs/intro-sla-3d-printing Your feedback and opinion is again most welcomed! Please comment below and press the feedback bottom of the…
-
We are working on this for a new feature of the website. Dedicated material articles will also be coming out soon.
-
Hello TypeR, Thank you for your feedback. This kind of interaction is very useful and please do comment again in the future, so that we can write better articles. So let’s see explore your comment. Here I found 2 data sheets with mechanical tests of 3d printed parts: ABS: https://www.innofil3d.co…
-
Hello everyone, My name is Alkaios and I just joined the 3D Hubs team, where I am taking over the curation of the Knowledge Base. I am a Mechanical Engineer and a PhD candidate in Additive Manufacturing (I am almost there) and I used to run a Hub in the UK. We want Knowledge Base to be the go-to s…
![[cnc-illustration-CNC_MILLING_WIDE]](https://www.hubs.com/talk/uploads/db5060/original/3X/6/9/699bea98c3f926194b30d42a8481c613d5e611a2.png){kind=link}