Go to homepage
3D Printing
3D Printing Service
FDM SLA/DLP SLS MJF DMLS/SLM Material Jetting
CNC Machining
CNC Machining Service
CNC Milling CNC Turning Surface Finishing Part Marking
Injection Molding
Sheet Metal Fabrication
Resources
3D Printing Guide CNC Machining Guide Injection Molding Guide Metal 3D Printing Guide Knowledge Base Webinars Help Center
Get instant quote
Feb 2015
13 / 16
Feb 2015
Jun 2015
Creastudiostore
Feb '15

I would like to share with you guys my last project. It is a minimal design LED Lamp 20x20x2.5 Cm. I used Extrudr Black ABS and ColorFabb Transparent XT filaments, a 60 Cm LED Strip and an On/Off Switch. It was printed in an Ultimaker2 at 150 Microns. Every piece was designed so it doesn’t need supports or glue. This way, the lamp is easy to assemble and doesn’t require any finishing.

The Black ABS Frame took almost 8 ours at 35 mm/s with a 20% Infill. For the trasparent piece i used “spiralize” in cura so it prints just a thin shell, printed at 35 mm/s it took 1 our an 45 min. The closing piece for the battery case took 25 min at 30 mm/s (because of the snap-fit details i used a slower speed).

pic_1.png
pic_1.png685×1024 859 KB

Summary

  • created

    Feb '15

  • last reply

    Jun '15
  • 15

    replies

  • 3.3k

    views

  • 9

    users

Creastudiostore
Feb '15

The Black ABS Frame took almost 8 ours at 35 mm/s with a 20% Infill. For the trasparent piece i used “spiralize” in cura so it prints just a thin shell, printed at 35 mm/s it took 1 our an 45 min. The closing piece for the battery case took 25 min at 30 mm/s (because of the snap-fit details i used a slower speed).

1 month later
Left
Apr '15

Wow, Awesome,

Can you please cgive more details of the leds.

Where did you bought the strip.

Does it use batteries ?
Thanks

Creastudiostore
Apr '15

You can download the project from Cults3D

This are the components:

* 60 cm LED Strip

http://www.amazon.it/lIGHT-Merdia-260LM-60x3528SMD-White-Light/dp/B00R9D7932/ref=sr\_1\_13?ie=UTF8&qid=1428400473&sr=8-13&keywords=60+cm+led+strip

* 12v battery

http://www.amazon.it/Varta-batterie-alcaline-V23GA-8LR932/dp/B00505CU58/ref=sr\_1\_2?ie=UTF8&qid=1428400410&sr=8-2&keywords=batterie+a23+12v

*On/Off Switch

http://www.amazon.it/Off-Switch-BEC-JR-Plug/dp/B00U205K5I/ref=sr\_1\_2?ie=UTF8&qid=1428400552&sr=8-2&keywords=on%2Foff+switch

2 months later
Ashley_R
Jun '15

Excellent! I want one! Its so simple but I’m sure it wasn’t simple to design. Now to connect a solar panel to charge the battery and you have a light you can use anywhere! Great work.