3D Printed LED Lamp by CreaLab

Creastudiostore · 2015-02-22T16:10:35.000Z

I would like to share with you guys my last project. It is a minimal design LED Lamp 20x20x2.5 Cm. I used Extrudr Black ABS and ColorFabb Transparent XT filaments, a 60 Cm LED Strip and an On/Off Switch. It was printed in an Ultimaker2 at 150 Microns. Every piece was designed so it doesn’t need supports or glue. This way, the lamp is easy to assemble and doesn’t require any finishing.

The Black ABS Frame took almost 8 ours at 35 mm/s with a 20% Infill. For the trasparent piece i used “spiralize” in cura so it prints just a thin shell, printed at 35 mm/s it took 1 our an 45 min. The closing piece for the battery case took 25 min at 30 mm/s (because of the snap-fit details i used a slower speed).

pic_1.png685×1024 859 KB

Summary

Printer: Ultimaker 2
Filament: Extrudr Black ABS and @ColorFabb Transparent XT filaments
Printing time: approx 10.5 hours
150 microns

pic_2.jpg1024×1024 176 KB

pic_3.png685×1024 884 KB

pic_4_0.jpg1024×1024 270 KB

gabriela3d · 2015-02-23T07:56:34.000Z

Crazy good stuff, guys! How long does it take to print?

ColorFabb · 2015-02-23T07:58:08.000Z

Nice design! What is powering the lamp?

Creastudiostore · 2015-02-23T10:07:46.000Z

a 12V battery for the moment!

Creastudiostore · 2015-02-23T10:22:40.000Z

The Black ABS Frame took almost 8 ours at 35 mm/s with a 20% Infill. For the trasparent piece i used “spiralize” in cura so it prints just a thin shell, printed at 35 mm/s it took 1 our an 45 min. The closing piece for the battery case took 25 min at 30 mm/s (because of the snap-fit details i used a slower speed).

a_raush · 2015-02-23T11:10:09.000Z

veramente interessante e ben fatto!

Creastudiostore · 2015-02-23T12:30:27.000Z

Grazie Mille!

Angel_LaHash · 2015-02-23T14:42:49.000Z

make a nice Inspection Tunnel

Creastudiostore · 2015-02-23T15:06:45.000Z

LOL

3Dscaleworks · 2015-02-23T20:08:29.000Z

Nice design

Pot8oSH3D · 2015-02-24T01:54:39.000Z

Really nice design!

Creastudiostore · 2015-02-24T07:15:02.000Z

Thank you Johnsaen.

Creastudiostore · 2015-02-24T07:15:23.000Z

Thank you!

Left · 2015-04-07T08:23:34.000Z

Wow, Awesome,

Can you please cgive more details of the leds.

Where did you bought the strip.

Does it use batteries ?
Thanks

Creastudiostore · 2015-04-07T10:01:28.000Z

You can download the project from Cults3D

Cults 3D

SQUARE LED LAMP

This elegant LED LAMP was designed for a 60 cm 12V LED strip. It includes a battery holding compartment and a On/Off switch mount. Optimised for the best printing quality on FDM Printers, Support Free and doesn't need glue to be assembled.

This are the components:

* 60 cm LED Strip

http://www.amazon.it/lIGHT-Merdia-260LM-60x3528SMD-White-Light/dp/B00R9D7932/ref=sr\_1\_13?ie=UTF8&qid=1428400473&sr=8-13&keywords=60+cm+led+strip

* 12v battery

http://www.amazon.it/Varta-batterie-alcaline-V23GA-8LR932/dp/B00505CU58/ref=sr\_1\_2?ie=UTF8&qid=1428400410&sr=8-2&keywords=batterie+a23+12v

*On/Off Switch

http://www.amazon.it/Off-Switch-BEC-JR-Plug/dp/B00U205K5I/ref=sr\_1\_2?ie=UTF8&qid=1428400552&sr=8-2&keywords=on%2Foff+switch

Ashley_R · 2015-06-02T12:22:31.000Z

Excellent! I want one! Its so simple but I’m sure it wasn’t simple to design. Now to connect a solar panel to charge the battery and you have a light you can use anywhere! Great work.