-
1) Try using Makerbot Print software, free at makerbot.com.This software will allow you to better control your machine. 2) Try playing with the bed temp. Sounds like you may want to lower your print bed temp. you may be not allowing the filament to cool slowly and actually are begining to burn it. …
-
Seems strange that the machine would just stop. The first thing I would check is the table level. the second thing I would check is to see if the extruder is staying hot, if the extruder is not staying heated it will cause the machine to register a fault and stop. good luck.
-
Please lets us know when the english site is up.
-
Is there a website I can check out your products? one of your posts said you have a system for the 5G, I would love to get one of those and worry about our Z18 later. Thanks.
-
Make sure you understand that the machine needs file format (stl.) to be able to slice your files and prepare them for printing. You can use any number of free software program (tikercad, Cad123, etc) to convert you 2D drawings into 3D models. You say you currently have a AutoCAD license, so you can…
-
We have a replacement Z18 coming to us in a couple of days, that we might be able to send you the build plate from. I would want to look at your past products and how well they work.Do you have a website?
-
Who are you and when do you think this will be ready? Thanks
-
That clicking is the teeth on the drive wheel slipping on the sides of the filament. this is not good on the drive wheel and the material scraped off of the filament will settle down around the bottom of the wheel housing and can cause future problems. use a short burst of air ( from a Can) to clean…
-
With filament like anything else in life, you get what you pay for. I know it is nice to save some money, but cheaper costs usually mean less quality control. Try to plan out when you buy filament so you do not run out. Using this type of cheap filament will do your machine more harm and cost you so…
-
I checked with the MakerBot rep today and he said the Inovation print studio software does not work with the 2X’s and that if you want this, you should switch to the Z17 instead. Wow, who can afford a whole lab full of Z17’s just to please makerBot.
-
Makerbot claims that their expensive Print Studio will control 40 or 50 machines. We thought about it but the cost 200K was way to much for my dean to swollow (and me to). We have been experimenting with the print function in Autodesk , Inventor 2016. It allows you to see all the machines as remote …
