A fellow 3D printer/CNC enthusiast amazed by the untapped technological potential of the current state of the Art.
Currently manufacturing with a bunch of metal frame A8 @ 24V, a dual heater volcano hotends, a fixed bed with manual bed leveling and some dustnprint bed for the perfect bed adhesion experience 
-
Hey @dfear, I have been on that road of trying to make those auto calibration sensor work and I did spent quite some time making them work and then finding out they are not so precise after all. If you want an auto level sensor for the experience of doing it then I say go for it, but if you are loo…
-
[Dustnprint_A8] Here is the metal a8 referenced before if you are interested.
-
Hi @Pyles26, I too use those crappy A8 and I did have a very similar issue printing the exact same part. Yours seems accentuated when compared to mine but I assume you are using the flexible acrylic default frame which would explain the higher noise gain since I use a metal frame with custom reinfor…
-
Hey @DoomerDGR8, yes the X_PROBE_OFFSET_FROM_EXTRUDER and Y_PROBE_OFFSET_FROM_EXTRUDER plays a major role in the sens that the machine has to offset itself by those values in order to probe the bed at a given XY. So if for example there is an X_PROBE_OFFSET of 100 and that the machine wants to prob…
-
I must admit, this dustnprint works wonders.
-
@Thomas1, sugar ftw
![[Dustnprint_A8]](https://www.3dhubs.com/talk/uploads/db5060/original/3X/d/f/df716ed4d224bfb5e605bd7aa05283de3ac077d0.png){kind=link}