-
Hi Carl - where is your school based? martin
-
Yes - all powders will generate static
-
Hi - metal filaments are usually 20% pla plastic and 80% metal fill (brass, bronze, copper, SS etc). However, you also have to remember that they are 3D Printed, not machined or cast metal. i.e. they will have a 1-2mm wall thickness and the centre will be whatever in-fill is selected. Hence, the fir…
-
Yes, store in an aluminium bin for 24 hours to eliminate static, then mix & build. Regards Martin
-
Try ramping up the extruder temp to 260C
-
Hi Brandon, I’ve owned an Objet Eden 500 and an objet Connex 500 in the past. Probably the most user friendly and reliable technology on the market. Material isn’t cheap - but cost is relative to what your customer is paying! I would advise that you get a test print first. The materials are not mech…
-
Hi, yes I can offer both. Bought two SLA systems when I was at the Royal Collegfe of Art. Moved to UCL and bought two SLS there. Give me a bell on 07739797248 All the best, Martin
-
Hi Pierre, sorry, bad reception on the mobile. Our address is D-Lab, Clarence Road Depot, Clarence Road, Berkhamsted, Hertfordshire, HP4 3AS. We are very easy access to London - about 20 miles from the west end and 30 mins on train to Euston. I think £50 a day for 5 days sounds ok - will need to che…
-
I can rent you a MakerBot Replicator 2, if this is any help? Based in Berkhamsted Hertfordshire you would have to collect & return. All the best, Martin 07739797248
-
Can rent you a MakerBot replicator2
