-
I have the machine with all-metal hotends. The firmware is current. I have had problems with inconsistent extrusion and even printing at 185C has resulted in a hotend jam. I think the hotend will require a complete strip-down to clear the jam. I have spent a lot of time on this machine for no good…
-
Hi, I have a CreatBot DX02 and am having difficulty printing PLA. I enable the cooling fan at full speed after the first layer but even printing as slow as 20mm/s I find that the cooling is ineffective and the layers, particularly at the front away from the fan ducts, soon start to distort and ris…
-
@Nightram Thank you for the insight. I have just ordered the dual-extruder version of the DX. You can be cynical about these Chinese products being “knock-offs” to make easy money for the manufacturer. OK the mechanics are inspired from Ultimaker and the hotends from E3D but there does seem to be s…
