Skip to main content
Skip to profile content
-
I built it myself. I am using Cura at default settings, 0.2mm layer height. 200/60 degrees. I’m fairly sure there are three perimeters. Ill definitely play with some of these settings in my free time. The filament feeder is working properly, and I’m printing at the default speed.
-
Forgot to add the images: http://imgur.com/kVSkTfS http://imgur.com/FDLgDIG
-
I tried cura with a test print, and it seemed alright. I’ll have to try a “real” print to get a better idea (i did a 10mm cube).
-
Nope. 3 perimeters have been enabled since the start.
