-
I built it myself. I am using Cura at default settings, 0.2mm layer height. 200/60 degrees. I’m fairly sure there are three perimeters. Ill definitely play with some of these settings in my free time. The filament feeder is working properly, and I’m printing at the default speed.
-
Forgot to add the images: http://imgur.com/kVSkTfS http://imgur.com/FDLgDIG
-
Hello. I’ve recently started 3D printing with my Prusa i3 MK2, and have been getting good prints off of it. There are a couple of issues that I don’t quite know how to fix. As seen in one of the images, there is a tiny, tiny gap between filament lines in the final layer of the print. Is this underex…
-
I tried cura with a test print, and it seemed alright. I’ll have to try a “real” print to get a better idea (i did a 10mm cube).
-
Nope. 3 perimeters have been enabled since the start.
-
Hello. I just got and setup my new Prusa i3 mk2 and I have been having quality issues with objects that I sliced myself. The objects that came on the SD card work flawlessly. I have printed Marvin, the whistle, and prusa logo with no issues. When I try to print objects that I slice with the prusa ed…
