-
Of course you can use that model, take care of supports needed to sustain bottom part of the blade.
-
I suggest to give a look to the generated gcode. That release of Cura instructs z movement in the form. 1 o. 2 instead of 0.1 or 0 2. The printer needs 0. or 1. format. If you wait for the first millimeter in height you will see filament extruded starting after 1.0 height. Of course the filament wil…
-
extruderWidth,0.48 Do you have a special nozzle? Normally the value is 0.4.
-
Hi, it could be very useful to know: - type and model of printer -type and diameter of filament -temperature reached by nozzle -some pictures of your problem
-
Yes, you are right. Take care to change nozzle heating it to a temperature that can melt your material and verify bed leveling of course… Then, in your slicer, set new nozzle diameter, suitable temperature, speed and so on.
-
Hi Shishi what about to try a manual feed of the filament with temperature around 210 C for PLA? And see how the material is extruded? Have you measured filament diameter with a caliper? If the value is different from 2.85 mm modify diameter setting on your slicer accordingly. Another suggestion …
