-
The newest actually looks pretty good! I recommend looking up Simplify3d troubleshooting guide. Its a great resource for troubleshooting various print issues. It has images to compare to to find the right problem and solution. Stringing can be due to a number of factors such as temp, cooling, speed,…
-
Excellent advice William!
-
You’re correct Phillip, there is no need to CAD from scratch as phone CAD files are available to build the case from. Open source ones sometimes need a little adjusting, as opposed to ones from the manufacturers. But usually very slight. If you’re doing feel and visual for now, go cheap material typ…
-
Many can help with this. Do you need modeling or engineering/design help? I am experienced in product design and not only modeling. Two very different trains of thought. Modeling is easy to find, but true design thinking and engineering is a little harder. If you need help with the latter, feel free…
-
Simplify 3D is by far the best slicer and the easiest to customize and get quick previews you can use to double check if it works at any layer of the print. For the non sticking PLA to the bed, It sounds like your bed temp may not be accurate. Put a thermometer to it and make sure its in fact 60 deg…
