-
@Solidified got it working. Seems like the files were bad and they fucked everything up. At this point (when i wrote here) i had already changed the thermocouple. After changing ptfe, nozzle, thermocouple, heatblock, and cleaning everything i got it working at 220 degrees with open “roof” and door.…
-
setting 3 [00]
-
setting 2: [53]
-
setting 1 [10]
-
@wirlybird Been working on it all day again. Tried different models. Tried with Flashprint and Simplify 3D according to the tips you gave. The auto level hasn’t been working properly, so i made manual levelling. The level seems fine. Trying the extrusion with “load” and it extrudes well. There …
-
hahanfry- nope. its working fine and smooth like that. and tried with several different filaments. Still dont manage to get it right even with changing the temperatures. starting to feel like the suckiest person ever. but i really dont understand what could be wrong. it was working for a bit, and …
-
Thanks again! Nice to get some help when needed. get back if i still have problems.
-
Thanks! I will try that! Since the hardware has been broken before, i haven’t had the chance to try so many different settings in the slicer. it’s a bit confusing when the “normal” profile is set to 210-220. I know i had lower temps on the ultimaker at school, but then it was a different printer, so…
-
Yep, Guider II. I can find it in Tried with flashprint too. same thing. It’s PLA, tried 210-220 degrees. heatbed 60. nozzle 0,4 layer from 0.08 to 0.12 (tried different ones) in simplify 3D i tried retraction 1 - 1200mm/min Tried extrusion multiplier 0,9-0,95 infill 15-20% fan speed 100% - …
-
Hey! Im getting a bit desperate now. I have some problems with under extrusion and that it stops extruding mid print. Very annoying. Now I’ve tried everything that I can think of and google. And sure, it’s better, but still not there. In the beginning of the fixing it was working for about 15-20% …
![[00]](https://www.3dhubs.com/talk/uploads/db5060/original/3X/4/1/41ee648545cce0d375311f1f67918ebb560f9321.png){kind=link}
![[53]](https://www.3dhubs.com/talk/uploads/db5060/original/3X/4/b/4b3301a2fb16780c8e890f9ef72c634f393c634a.png){kind=link}
![[10]](https://www.3dhubs.com/talk/uploads/db5060/original/3X/d/5/d5310cbe5b232a4c1b650216644abd9096c8971e.png){kind=link}