Go to homepage
21 / 22
Jul 2015

Hi Tobias,

Thanks for your great comment! To reply to the points your making:

- Unfortunately I haven’t come across a twin-screw extruder yet but I’ll definitely let you know if I do.

1. Very interesting information. If that is ok with you I’d like to add it to a previous post that went into detail on the extrusion process.

2. Indeed true, this is also one of the reasons I’m assuming recycling prints from the same original filament spool will give better results than recycling all kinds of different prints. Do you agree that this might be the case?

Regarding recycling household waste, I will try to get some results with this at a later stage and will definitely start out by using one type of waste product in order to minimize this effect.

3. Cool info, again if that’s ok I’d like to add this to my previous post as well. In my future posts I will describe the extrusion and printing quality of different ratio’s of new and recycled material so this aspect will get a lot more coverage soon :wink:

4. As far as I now there is no cleaning mechanism present in the Filabot that I am using. I don’t know about the other extruders but my guess is there isn’t any. However the nozzle can easily be removed which makes the Filabot rather easy to keep clean.

Will definitely nudge you if I have any questions, thanks!

Cheers,

Bram

Hey Bram,

Sure thing, feel free to add any info to your posts!
I am on vacation for the next three weeks, so I don’t have access to any official documents and material, but I can tell you what I know until I get back.

To 2. If you recycle the same material, e.g. Black Pla, the type of Spool doesn’t really matter. It could be from different manufacturers even, because pure standard printing spools should roughly use the same composition of material to fillers.

3. I have a graphic somewhere in my office that shows the correlation between material strength and recycling cycles of a polymer. I’ll try to find that and attach it to a post soon.

4. Cleaning, such as degassing and filtering is usually done to increase the purity of polymers, e.g. to extract solvents, gaseous products and other modificators. That should only cauise problems with print quality when recycling other plastic waste, because the resulting filament will be “dirty”.

Grtz,
Tobi

Hi im just wondering if anyone has any experience with the strooder and what they think of it. Thanks

I don’t think that it’s already available. It says November on their website I think.

He Tobias,

Thanks again! Great info. If you can find that graphic that would be awesome. Have a nice vacation :wink: and I will let you know if I have any questions.

Cheers,
Bram

I just had a small discussion yesterday with my girlfriend as we where driving home…

her biggest question was: What does it cost for a extruder and shredder versus a roll of PLA…

had to tell her that an extruder was about 2500 dkk… a shredder of decent quality about the same…

then running cost… about 80 dkk for 1 kg af pellets and they are not easy to find…

now she laughed when i told her that i could get a roll of pla for about 50-60 delivered…

does it make much sense to bother recycle?

Hi @Davide_14,

I think it only matters when you have enough volume.

In my case the recycling part is not financialy interesting to do myself.

But I think it is very important do research in this area, cause it can make a huge different for the enviroment.

Another part is, you can create custom colors. In this area it can be interesting to experiment with that. On the other hand.

Most situations you can paint the printed parts.

Hi @Boelle, this is a very interesting discussion and in general I agree with @studioK that it all depends on what you find important.

In the case of using new pellets to produce filament this would be mainly a decision based on the financial benefit which in turn is mostly determined indeed by the volume you produce. If you want to buy these pellets I don’t think they are that hard to find by the way. @colorfabb and @filabot are for instance two companies that sell ABS and PLA pellets meant for 3D printing specifically.

In case you can use your old prints or even other types of waste this of course would improve the business case even more and indeed would benefit the environment. So for me I think it is definitely a useful research area although I can understand that there are definitely cases in which simply ordering spools of filament is preferable.

Cheers,

Bram

1 month later

This is a great overview of whats available! Thanks for posting.