Star Wars 3D Design and Print Competition

Epic_Invento · 2016-03-17T14:35:59.000Z

My friend and I decided to make the map to Luke Skywalker from “The Force Awakens.” Then we took it a dozen steps further.

To be clear, we didn’t print the map itself. We printed the flash-drive-shaped object that BB-8 carries around, but with space to fit a real flash drive within it. With this, we came to realize, “What good is a flash drive without a USB port?”

So then we printed a Star Wars themed USB port with over a dozen 3D printed PLA parts. The port is complete with a mechanical descending and lowering vertical port, plus a fully-functional mechanical iris door at the top. The Resistance can finally read USB drives.

Check it out:

YouMagine

Star Wars Flash Drive and USB Port Extension

My friend and I decided to make the map to Luke Skywalker from "The Force Awakens." Then we took it a dozen steps further. To be clear, we didn't print the map itself. We printed the flash-drive-shaped object that BB-8 carries around, but with space...

image (3).jpeg2448×3264 1.34 MB

image (4).jpeg2448×3264 1.53 MB

image (1)_0.jpeg3264×2448 1.4 MB

biglildesign · 2016-03-17T20:52:14.000Z

Hi Simona,

Is there a specific cut off time on March 21st? You mentioned that the winners will be decided on March 21st so there must be a cut off time in order to give the Ultimaker / 3D Hubs team members enough time to go through all the submissions and decide on the winners.

edthomp · 2016-03-17T23:58:52.000Z

+1 for NEW DESIGNS

edthomp · 2016-03-18T00:00:06.000Z

+1 for NEW DESIGNS

edthomp · 2016-03-18T00:02:25.000Z

+1 for NEW DESIGNS

edthomp · 2016-03-18T00:04:35.000Z

+1 for NEW DESIGNS

edthomp · 2016-03-18T00:06:36.000Z

+1 for NEW DESIGNS

edthomp · 2016-03-18T00:06:41.000Z

+1 for NEW DESIGNS

edthomp · 2016-03-18T00:08:29.000Z

Cant wait for what your conjuring up

edthomp · 2016-03-18T00:10:23.000Z

+1 for NEW DESIGNS. Seeems like you’re another victim of downvoting =(

edthomp · 2016-03-18T00:11:56.000Z

+1 for NEW DESIGNS. Seems like someone is downvoting people all around and put you into the negatives. I really hope the judges totally neglect the votes. It’s creating a bad aura for the entire community.

edthomp · 2016-03-18T00:12:57.000Z

+1 for NEW DESIGNS

edthomp · 2016-03-18T00:13:23.000Z

+1 for NEW DESIGNS

edthomp · 2016-03-18T00:14:17.000Z

+1 for NEW DESIGNS

edthomp · 2016-03-18T00:17:36.000Z

+1 for NEW DESIGNS

Geoff_Wicks · 2016-03-18T06:41:13.000Z

I can’t promise it will be fantastic, but I can promise it will be a new model and not something that was an old project that gets thrown in the hat.

Geoff_Wicks · 2016-03-18T23:22:15.000Z

I think the idea of the competition is to enter models you have created yourself.

MrArtist1989 · 2016-03-18T23:36:13.000Z

At least i am honest i did not make all 3 of them, made 1 of them and altered the others to fit bottles to be part of my whisky collection…

Sturnino · 2016-03-19T12:32:25.000Z

I changed rgb led, schematics and code on youmagine

Sturnino · 2016-03-19T13:15:48.000Z

Hi to everyone this is my entry

YouMagine

R2D2- Arduino core

I created this design for my sister, I had the Pololu Round Robot Chassis Kit so I created all the parts according to it. I created different versions of stl files, some have holes for sensors, it depends by what you want to create. I ordered...

It’s a R2D2 working with Arduino.

I will keep updating the design (electronic stuff) because many parts are coming in theese days.

Hope you like it.

photo_2016-02-29_14-21-04_0.jpg960×1280 128 KB

photo_2016-02-29_14-21-02.jpg960×1280 133 KB

photo_2016-02-29_14-20-38.jpg960×1280 144 KB

IMG_20160319_113226.jpg4160×3120 1.64 MB

IMG_20160319_130109.jpg4160×3120 1.43 MB

IMG_20160319_113349.jpg3120×4160 2.73 MB