spectrum z510 software problems

Spectrum510 · 2017-04-24T05:19:30.000Z

Thank you so much!! You are in time and super helpful with the answer. Especially with the powder advice.

Spectrum510 · 2017-06-04T21:48:23.000Z

Could you please share a link on hp 11 print heads that are right for z510. And do they really need to be different color or it doesn’t matter if they are let’s say black color? How do they work?

Thank you in advance!!!

Spectrum510 · 2017-06-04T21:49:32.000Z

I

designanything3 · 2017-06-04T23:25:44.000Z

You need c4810a hp black only heads.

Spectrum510 · 2017-06-10T17:38:02.000Z

Thank you!!

kaligula20 · 2017-07-04T09:23:26.000Z

Hi,

Try www.3dcolors.pl - tested on 660pro and Z510. Works fine. Very cheep.

kaligula20 · 2017-07-04T09:28:18.000Z

Hi,

If any one is interested in testing some binders I would recommend www.3dcolors.pl

Spectrum510 · 2017-07-05T15:22:28.000Z

“canadapowder” these guys have the same cheap prices and even cheaper on stuff like clear binder and head cleaner. Meanwhile they look more legit

moahmedshanash · 2017-11-14T07:20:14.000Z

I have zcorp 650 and it works perfectly , once i insert the ethernet cable and connect to the laptop the machine freez and i have to restart.

Sibghaaleem · 2019-01-17T04:30:05.068Z

Hi!!
I’ve z510 for long time and I give some break using the printer. Now I’ve started it and LCD shows only the welcome note “high quality 3D printer”. Printer isn’t working and not even responding to keys.it would be great if anyone suggest what can be the issue?

kaligula20 · 2019-01-17T13:25:36.040Z

Plug in PS2 keybord and VGA plug monitor at the back to see what is going on. First thought stuck on BIOS setting or the BIOS battery is down.

Sibghaaleem · 2019-01-18T04:40:36.699Z

Thank you for help.
What should appear on monitor when I connect it in vga plug? Am I supposed to give input through keyboard? If yes then how?

kaligula20 · 2019-01-18T08:31:23.809Z

Like I wrote, you will se the BIOS starting up (normal like in every PC), if you are familiar with PC you will find on the screen some info. Probably BIOS battery dead. Just plug the monitor and PS2 keyboard and you will see.

Sibghaaleem · 2019-01-24T07:34:13.614Z

I’ve attached keyboard and monitor but it shows different errors like time/date

IMG20190124122032.jpg2448×2448 906 KB

Sibghaaleem · 2019-01-24T07:35:34.077Z

When I press f1 (boot) then it shows screen like this

IMG20190124122309.jpg2448×2448 1.35 MB

kaligula20 · 2019-01-24T08:35:13.935Z

Typical, I as mentioned the BIOS battery is dead. You must replace the battery on the motherboard. Diskette error will probably does not matter in booting but can be switched off in BIOS setup.

kaligula20 · 2019-01-24T08:35:54.402Z

The other photo shows online state and normal operation I think so this means you can print. If you need any cheap quality binders for the printer send me a message.

Sibghaaleem · 2019-01-25T05:58:37.056Z

I’ve replaced the battery but issue is not resolved. System does not boot by itself, I’ve to press f1 for boot.

Sibghaaleem · 2019-01-25T06:26:54.365Z

Now I’ve another problem. I just switched off the printer and switched it on again, now it’s fan is not working and I think supply to main board is not through… Because LCD on control panel is also off. I’m in a real mess…

Sibghaaleem · 2019-01-25T06:27:42.320Z

Vga signal is also gone.