For practical purpose large format printers usually have much larger nozzles and run with thicker layers (unless you want to spend days or more on a print). So it’s literately like zooming in on the model. For example, using a 1.0mm nozzle means any detail in the x/y axis smaller than 1.0mm is not possible without putting a smaller nozzle and therefor drastically increasing print time(resolution in z axis depends on layer height). While small detail isn’t possible this shouldn’t have any effect on dimensional accuracy or quality of prints that don’t involve tiny detail. This also means there is little room for error because small imperfections are also “zoomed in”. A hiccup on a print with .1mm layers can easily go unnoticed without a magnifying glass but with the large format any imperfection is going to be much more noticeable. Looks like these guys have it dialed in pretty good!
-Jesse
I have been playing with speed vs detail for a few days now(that crystal took 16 hours) with , with the dragon currently printing the time lost seems really to be in the supports. We are printing him completely hollow at about 38" long and the support structure its generated is a bit excessive. I am trying to get the support settings right so that I can shave hours off my print times. The large format is fun and surprisingly simple to work with!
Thank you for all of the help. Ill be sure to continue posting our creations.
I have been playing with speed vs detail for a few days now (that crystal took 16 hours with the infill at 50%) , with the dragon currently printing the time lost seems really to be in the supports. We are printing him completely hollow at about 38" long and the support structure its generated is a bit excessive. I am trying to get the support settings right so that I can shave hours off my print times. The large format is fun and surprisingly simple to work with!
Thank you for all of the help. Ill be sure to continue posting our creations.
