Makerbot Rep Gen5 and Simplify3d 3.1 - need good tested profile exported .fff - Help

Jan_Skraba · 2016-10-22T16:14:45.000Z

Hi New to this board and new to 3D printing although not to CNC

Although the new Makerbot Print is better than the descktop I still like the features of Simplify3D.
I have used the default setup for the Rep5Gen in 3.1 and tweeked it about alot (maybe too much).
Not getting the results I expect. So

Is anyone out there using the Makerbot Rep 5th gen with Simplify3d 3.1 and have better luck, can you export your profile to an *.fff file and post here.

Thanks, If I have more sucsess I will post mine, but stuck at the moment

Thanks … JCS

3dprintingguy · 2016-10-24T13:06:36.000Z

Hi Jan, post your FFF profile here and I can have a look at it for you

Jan_Skraba · 2016-10-24T17:48:04.000Z

Hi

Thank you for looking at this, I have a Gen5 with Smart+ head.

The attached files has a DXF extension (because they do not allow posted of files with FFF extension, just change the DXF to FFF and it should open in notepad.

I have had files fail with this FFF but not all of them which is strange.

Hope you can help and I can get a reliable FFF to work with the printer. Using the new Makerbot Print which is better than Desktop but still not as good as Simplify3d 3.1.

Regards JCS
maker-rep5-smart_3.dxf (8.08 KB)

Jan_Skraba · 2016-11-09T21:55:38.000Z

Hi

Are you having any luck with this. Please respond yes or no so I know if you are getting this and its worth pursuing.

JCS

Jan_Skraba · 2016-11-17T19:41:55.000Z

Hi

If you are not going to reply at all why bother asking to post the file i have and saying you will help?, OR is it that you needed an FFF file for a Makerbot and did not want to ask!!!

JCS

3dprintingguy · 2016-11-17T20:59:41.000Z

sorry didnt see you posted the profile

will have a look at it over the weekend, havent played around with the profiles we are using, but the main thing is turn on rafts for now

Jan_Skraba · 2016-11-17T21:10:03.000Z

Hi

I was loosing hope on a reply so very please to have one. Can you post the FFF (exported) that you use so I can also look to see if I can spot any differances. I may have just messed up the original. Change the .FFF to .DXF then it will alow you to post here.

Regards Jan Skraba

ErrinG · 2017-06-25T05:04:11.000Z

In desperate need of an FFF for Simplify3D to run my Makerbot 5th Gen. Been battling and tuning for weeks now.

Errin in Louisville

egnadinger@yahoo.com

Makerbot Rep Gen5 and Simplify3d 3.1 - need good tested profile exported .fff - Help

Makerbot Rep Gen5 and Simplify3d 3.1 - need good tested profile exported .fff - Help

created

last reply

replies

views

users

likes

link