Looking to Buy a Printer

Lynchpin · 2015-03-30T21:18:10.000Z

Thanks for your reply Simona, I will check out this guide for sure… thanks for that

Alex3DHubs · 2015-03-30T21:35:37.000Z

The price is low enough that I would recommend going for new. That way, if something goes wrong, you can always reach out to the manufacturer. With used, its hard to see what the problems is if its your first time and the manufacturer may not be able to assist.

Lynchpin · 2015-03-30T21:46:43.000Z

Thanks Pomaer,

I’m definitely looking at a lower end model so the first few that you mentioned are probably not exactly what I’m looking for.

Also, good advise on the second hand printers I’ll certainly keep that in mind so thank you for that

Regards,

B

Lynchpin · 2015-03-30T21:47:59.000Z

Thanks Ahmet & Pot,

Looks like this could be a winner for me alright… I will investigate further and see where I might be able to source one

Regards,

B

Lynchpin · 2015-03-30T21:52:24.000Z

ahh, didn’t realise Printers could be upgraded? makes sense I guess but I just assumed people would upgrade by purchasing newer models as they become more experienced etc…

I will look into the Da Vinci 1.0a. thanks for that…

Regards,

B

scotttstephens · 2015-03-30T21:56:08.000Z

We have had good success with the UP+ though they are are a fairly old design now. They are cheap at the moment as they are bringing out the new model “UP Box”.

http://www.evok3d.com.au/Default.asp

Pot8oSH3D · 2015-03-30T22:02:17.000Z

If you’re in Oz, here’s the guy to buy an Up! from…

http://3dprintingsystems.com/products/up-mini-3d-printer/

He’s pretty active on the manufacturer forum ( pp3d.com ) and seems to know his onions.

Cheers!

AndyL

Pot8oSh3D

Lynchpin · 2015-03-30T23:00:29.000Z

Thanks Jak,

I will definitely head out to Collingwood to check out that store…

Cheers for the helpful info… I’m not sure I’d be sufficient or have the confidence to put together a kit model just yet…

Regards,

B

Lynchpin · 2015-03-30T23:20:18.000Z

Thanks Scott…

Are you involved with evok3d? I just checked the website… is it the UP +2 that you are recommending?

http://www.evok3d.com.au/Up\_Plus\_2\_personal\_and\_professional\_3d\_printer\_p/upp003.htm

Regards,

B

Lynchpin · 2015-03-30T23:20:57.000Z

Thanks Alex, I’ll take your advise on board…

Much appreciated,

Regards,

B

Lynchpin · 2015-03-30T23:22:26.000Z

Thanks Andy,

yeah, I’m based in Melbourne, I will check it out. Have you bought from this website before?

Cheers,

B

scotttstephens · 2015-03-30T23:34:55.000Z

No I am not with Evok3d. I am an engineer based in Melbourne. Have 3 UP plus printers for prototyping and producing end use parts. The UP plus 2 would be a good buy at the moment. There are heaps of tricks and mods you can make to make them print better. I have added an enclosure and temperature controller which helps.

3DPrinterGear

Parts UP3D

UP3D - Parts UP3D

I have tried a couple of other printers and found that the UP plus is easy to use and gives reasonable quality prints. Any supplier is fine:

3D Printing Systems: Shop for 3D Printers, 3D Scanners and laser cutters

3D printer provider Australia | 3D Printing Systems

Shop online for 3D Printers, 3D Scanners, laser cutters and all 3D Printing accessories at Australia's largest independent distributor.

3DPrinterGear

3D Printer Gear | 3D Printing - Sales - Repairs - Learn

With over 100x 3D printers in our farm, we sell what genuinely works. See our wide range of 3D Printers, 3D Printing materials and accessories. Free shipping over $150. Call us!

I think that the 3dprintingsystems it the distributor for the ANZ region and services most of the other suppliers.

Cheers

Scott

Pot8oSH3D · 2015-03-30T23:43:23.000Z

Nope. I’m in the UK.

Filemon · 2015-03-31T14:34:39.000Z

Be sure to check out the Buyers Guide as well: Best 3D Printer Guide 2023 | Hubs

Lynchpin · 2015-04-05T08:17:58.000Z

Thanks Scott. I’m looking to start off and just get something printed off here via the Hub, next step will be to purchase a Printer. Thank you for the details that you have provided me so far. Is there a lot of activity on here with regards people requesting Prints from people with Printers? How often would you receive requests to print objects?

Thanks again,

Brian

Lynchpin · 2015-04-05T08:35:46.000Z

Hey Simona,

Just checked out that link. thanks for that, its very informative. what Printer do you run with?

Lynchpin · 2015-04-07T10:27:57.000Z

Thanks for the useful info

Brian

JGroupRobotics · 2015-05-14T07:56:50.000Z

Image result for dimension delta 3d printer J Group Robotics

Quick Details

Brand Name:J GROUP ROBOTICS

Model Number:P0010

Place of Origin:India

Packaging & Delivery

Packaging Details:3D Printer - 1 quantity 3D Printing Filament - 1 quantity Charger - 1 Quantity Warranty Card valid upto six months. Shipping, Duties & Taxes extraDelivery Detail:3 WEEKS

Print size ( X Y Z ): 420 MM X 720 MM X 420 MM
The Layer Thickness : 0.05mm to 0.2mm
Layer Resolution : 50 microns to 250 microns
Chasis : Aluminum
Printing Filament : PLA,ABS,NYLON,PVA,PP,TGLASE,WOOD,STONE,CARBON FIBER & MORE
Filament Diameter: 1.75mm
Nozzle Diameter: 0.5mm - 0.3mm all metal
Machine Dimensions: 650 mm x 480 mm x 850mm
Shipping box dimensions : 700 mm x 580 mm x 570 mm
Machine weight : 16kg
Shipping box weight : 19 kg
Maximum Print speed : 100 mm/s
Recommended Print speed: 70 mm/s.
Print Plate Size : 250mm x 250mm.
Print Plate (Build Platform) : Heated bed Glass.
AC Input: 100-240 Volts , 50-60 Hz
No.of Extruders: 2
Power Requirements: 24 volts , 14.5 Amp
Connectivity (Interface): Usb, SD card
Electronics: Arduino 2560 sheild with LCD & SD Card holder
Operational Environment (recommended) : 15-32 degree celcius
3D printing Software : Printware
CAD Input data file format supported : .Stl, .obj
Client Operating System : Windows, Linux, Mac
Print in dual color : Yes
Warranty : One year - Limited Warranty
Price - 9500$ USD
Contact: sales@jgrouprobotics.com

funkyfinn · 2015-06-18T09:41:24.000Z

aurarum.com.au

Based in Ringwood, they sell a few prints which are all quite great. They also have incredibly cheap filament.

Cheese3DPrints · 2015-08-29T05:49:07.000Z

You might want to consider ordering a cheap printer internationally and dealing with the price. Considering the small range of printers available in oz compared to the US, it is probably cheaper to by one and then ship it.

I would recommend a M3D Micro, as from first hand experience it is an excellent printer. Plus, for $399 (and about $100 shipping) you get 50 microns resolution.

There is also a Printrbot simple, which is pretty cheap too…

Anyway, if you don’t mind paying bit extra for shipping my advice it to get a printer internationally, as overall you can probably get a better printer for a cheaper price.