Looking to Buy a Printer

[Lynchpin]

Thanks for your reply Jason, I will look into this Printer as I weigh up my options. Where are based? where would you be shipping from?

[Lynchpin]

Thanks for your reply Simona, I will check out this guide for sure… thanks for that

[Alex3DHubs]

The price is low enough that I would recommend going for new. That way, if something goes wrong, you can always reach out to the manufacturer. With used, its hard to see what the problems is if its your first time and the manufacturer may not be able to assist.

[Lynchpin]

Thanks Pomaer,

I’m definitely looking at a lower end model so the first few that you mentioned are probably not exactly what I’m looking for.

Also, good advise on the second hand printers I’ll certainly keep that in mind so thank you for that

Regards,

B

[Lynchpin]

Thanks Ahmet & Pot,

Looks like this could be a winner for me alright… I will investigate further and see where I might be able to source one

Regards,

B

[Lynchpin]

ahh, didn’t realise Printers could be upgraded? makes sense I guess but I just assumed people would upgrade by purchasing newer models as they become more experienced etc…

I will look into the Da Vinci 1.0a. thanks for that…

Regards,

B

[scotttstephens]

We have had good success with the UP+ though they are are a fairly old design now. They are cheap at the moment as they are bringing out the new model “UP Box”.

http://www.evok3d.com.au/Default.asp

[Pot8oSH3D]

If you’re in Oz, here’s the guy to buy an Up! from…

http://3dprintingsystems.com/products/up-mini-3d-printer/

He’s pretty active on the manufacturer forum ( pp3d.com ) and seems to know his onions.

Cheers!

AndyL

Pot8oSh3D

[Lynchpin]

Thanks Jak,

I will definitely head out to Collingwood to check out that store…

Cheers for the helpful info… I’m not sure I’d be sufficient or have the confidence to put together a kit model just yet…

Regards,

B

[Lynchpin]

Thanks Scott…

Are you involved with evok3d? I just checked the website… is it the UP +2 that you are recommending?

http://www.evok3d.com.au/Up\_Plus\_2\_personal\_and\_professional\_3d\_printer\_p/upp003.htm

Regards,

B

[Lynchpin]

Thanks Alex, I’ll take your advise on board…

Much appreciated,

Regards,

B

[Lynchpin]

Thanks Andy,

yeah, I’m based in Melbourne, I will check it out. Have you bought from this website before?

Cheers,

B

[scotttstephens]

No I am not with Evok3d. I am an engineer based in Melbourne. Have 3 UP plus printers for prototyping and producing end use parts. The UP plus 2 would be a good buy at the moment. There are heaps of tricks and mods you can make to make them print better. I have added an enclosure and temperature controller which helps.

Parts UP3D

I have tried a couple of other printers and found that the UP plus is easy to use and gives reasonable quality prints. Any supplier is fine:

3D printer provider Australia | 3D Printing Systems

3D Printer Gear | 3D Printing - Sales - Repairs - Learn

I think that the 3dprintingsystems it the distributor for the ANZ region and services most of the other suppliers.

Cheers

Scott

[Pot8oSH3D]

Nope. I’m in the UK.

[Filemon]

Be sure to check out the Buyers Guide as well: Best 3D Printer Guide 2023 | Hubs

[Lynchpin]

Thanks Scott. I’m looking to start off and just get something printed off here via the Hub, next step will be to purchase a Printer. Thank you for the details that you have provided me so far. Is there a lot of activity on here with regards people requesting Prints from people with Printers? How often would you receive requests to print objects?

Thanks again,

Brian

[Lynchpin]

Hey Simona,

Just checked out that link. thanks for that, its very informative. what Printer do you run with?

[Lynchpin]

Thanks for the useful info

Brian

[JGroupRobotics]

Quick Details

Brand Name:J GROUP ROBOTICS

Model Number:P0010

Place of Origin:India

Packaging & Delivery

Packaging Details:3D Printer - 1 quantity 3D Printing Filament - 1 quantity Charger - 1 Quantity Warranty Card valid upto six months. Shipping, Duties & Taxes extraDelivery Detail:3 WEEKS

• Print size ( X Y Z ): 420 MM X 720 MM X 420 MM
• The Layer Thickness : 0.05mm to 0.2mm
• Layer Resolution : 50 microns to 250 microns
• Chasis : Aluminum
• Printing Filament : PLA,ABS,NYLON,PVA,PP,TGLASE,WOOD,STONE,CARBON FIBER & MORE
• Filament Diameter: 1.75mm
• Nozzle Diameter: 0.5mm - 0.3mm all metal
• Machine Dimensions: 650 mm x 480 mm x 850mm
• Shipping box dimensions : 700 mm x 580 mm x 570 mm
• Machine weight : 16kg
• Shipping box weight : 19 kg
• Maximum Print speed : 100 mm/s
• Recommended Print speed: 70 mm/s.
• Print Plate Size : 250mm x 250mm.
• Print Plate (Build Platform) : Heated bed Glass.
• AC Input: 100-240 Volts , 50-60 Hz
• No.of Extruders: 2
• Power Requirements: 24 volts , 14.5 Amp
• Connectivity (Interface): Usb, SD card
• Electronics: Arduino 2560 sheild with LCD & SD Card holder
• Operational Environment (recommended) : 15-32 degree celcius
• 3D printing Software : Printware
• CAD Input data file format supported : .Stl, .obj
• Client Operating System : Windows, Linux, Mac
• Print in dual color : Yes
• Warranty : One year - Limited Warranty
• Price - 9500$ USD
• Contact: sales@jgrouprobotics.com

[funkyfinn]

aurarum.com.au

Based in Ringwood, they sell a few prints which are all quite great. They also have incredibly cheap filament.