Skip to main content
8 results for@wrbehel #3d-printers
Advanced filters
Relevance
Relevance
Mar '16
-
I am having great success running my bed at 95C, I checked the temp and found it was running higher than the settings so I adjusted it down 5 degrees a...
Aug '16
-
Sounds almost like the part is trying to print above the platform, if this is not the case, it may be tiny pieces of filament in the drive gear. Is the...
Feb '16
-
I have only been 3D printing for a month now but wanted to share my experiences for other people who are new to this exciting yet challenging hobby. Ma...
May '16
-
If your left head is low and dragging across the part, that could be some of your problem. I had the same issue and ended up putting two pieces of pape...
Apr '16
-
Look to see where the spring is on your y belt, when it is home(Back Right) the spring should be on the top belt loop about 3"-4" from the front. This...
Apr '16
-
If you are printing on glass is it moving? looks like something is loose and moving in X and Y axis. May want to make sure the spring tensions Clips on...
Feb '16
-
What temps are you using? I would use 220C extruder and 95C Bed. I would also use Aquanet Extra super hold Hair spray on the glass.
Feb '16
-
I'm new to 3d printing but if your shell is set to 0 what gives it the outside profile? From watching my printer it lays the shells and then connects t...