Skip to main content
19 results for@3drapidprints #3d-printing
Advanced filters
Relevance
Relevance
Nov '17
-
You can also lower the layer height which will make them less noticeable.
Nov '16
-
I find it helpful to have the emails and/or phone numbers of hubs around you. You can ask them by clicking the "contact this hub" button.
Nov '16
-
Very cool! I would also be interested in a US retailer.
Nov '16
-
I use a can of compressed air upside down to cool off the base of the parts, and then I use a thin spatula to pry the part off. https://www.amazon.com/...
Sep '16
-
I agree! The I3 is simply, quite literally, amazing.
Nov '16
-
Try printing at a lower speed as well as aiming a fan to provide better cooling.
Nov '16
-
Make sure the belts are very tight.
Oct '16
-
I agree, most likely the end stop is bad. If not, then it would be your logic board going.
Oct '16
-
Hello! Glue is used to help with platform adhesion. I would not recommend it beacuse it can be very messy and there are better solutions. I use blue pa...
Sep '16
-
Hello! What is your bed and extruder temps? Also, what material are you printing in?
Sep '16
-
Hi Robert! Two issues come to my mind. The first is under-extrusion. Set your flow rate to 100% and make sure your filament size is correct. If that do...
Aug '16
-
Hi Chris! A few suggestions: make sure the flow rate is set to 100% and also make sure that the filament size (diameter) is set correctly in your slice...
Aug '16
-
Hello Fellow 3D Printer Enthusiasts, I am working with a friend on a project to enlarge a Prusa Mendal I3 off-brand printer to print objects 500x500mm....
Mar '16
-
Very Nice! I'm sure he'll love it.
Apr '16
-
Hello! I would try a layer height of .2 or .1 on Marvin, just so that he has nice sharp edges. Also, what is your print speed? The hook on top of Marvi...
Apr '16
-
Hello! There is no "right" answer. For me, I will leave the spool in its stand and loaded all the time, unless I want to change colors. I also don't fl...
Apr '16
-
Look at where the fans connect to the wires and more importantly, where the wires connect to the circuit board. Does that connection seem loose? If you...
Mar '16
-
Hello everybody! My name is Sam Johnson, and I thought I would introduce myself here on Talk. I own a Prusa I3 and have Autodesk Inventor. I am rather...