-
Hey @Tolga_Giray I know it’s sort of a general problem , but it might be helpful if you’d indicate what printer you’re using. But from what you describe this is a “retraction” setting. It’s part of the printing process. Some slicers/printers do allow to switch it off though
-
You are kidding, right? First of all I never said in moving to a different voltage. And you advices can ruin a printer forever! Careful man!
-
Thanks but Voltage is one thing. Frequency is another. Wrong frequency doesn’t burn or damage, just change the electronic “clock”.
-
I second this, I had a similar problem to find out that my power supply was burnt out o_O
-
It should work without heated bed. If it doesn’t work try hairspray or white school glue stick, both work good even without heated bed. Good luck!
-
As far as i know you need 3M blue painter tape 2090. The thing with this tape is that it uses a coating to prevent paint penetrating and sticking to it for faster removal, well that coating is what “sticks” to plastic. So i dont think your tape will work. If you’re printing with pla you can print d…
