-
I use 3D Solutech PLA filament. All of the print between 10-15% infill. 205 Nozzle temps 65 bed temps. default raise3d print speed, I haven’t changed any print speed setting. Shift height is random. Sometimes It even happened at very beginning. I don’t use buildtak bed. All the print is made on gla…
-
I have done everything on this printer to check what the problem is and none of them work. Here is a topic I list everything I have checked and fixed. If you guys can give me more advice that will be great. Otherwise I just want to know if there are any printer has better or more reliable design th…
-
So here is the situation. I have a raise3d N2 plus printer right now. This printer is good and has a decent print quality, but here is a problem. This printer sometimes will shift layer on parts, and here is no clue why this shift happen. After shift couple print the printer run like normal again un…
-
So here is the situation. I have a raise3d N2 plus printer right now. This printer is good and has a decent print quality, but here is a problem. This printer sometimes will shift layer on parts, and here is no clue why this shift happen. After shift couple print the printer run like normal again un…
