Skip to main content
Skip to profile content
-
These boards are cheap but very unreliable. I have burned mosfets, plugs, low 5v and a lot of similar stories from my experience. But if you know what you do and build the printer for yourself these are all good options.
-
I had the same problem and yes pins are inverted. Ibelieve it is a design mistake thats it. There are many similar boards where pins are in correct order. If you have new idc socket and idc crimper like me it is easy to swap them but w/o tools the best way is to trim the locating tub and use it reve…
-
With stock hotend it is not wise to print petg. It is better to switch to a whole steel hotend and best brand is Micro-swiss. I replaced my hotend with it and now I can print every material.
