-
I have it. See another thread on this forum.
-
Recently I found out the general extrusion multiplier should be lower than 1. Now testing 0,92 with PLA.
-
My experience is limited to Ultimaker II (2 years) and Felix Pro 1 (four months) and some tests with Zortrax, XYZ and Craftbot. * UM II is okay, but for me the extruder and hot-end are hampering good results. Noisy. * Zortrax works fine but no tinkering possible and terrible to get parts off of th…
-
To be honest, Simplify3D is difficult to explain. Many many options, places to store settings. At the moment I have two FFF profiles, from which you can work. I tested all settings in numerous parts and materials, but fine tuning for each print is inevitable. SINGLE EXTRUDER Not much to explain. …
-
Sorry but I said ‘tonight’. It reads as if you’re pushing me. Maybe you also specify a bit more what you are looking for. Single extrusion, double? Tool changes? Which materials? How experienced are you with Simplify3D? Do you need some explanatory text with it?
-
Hi, I have it and will post it this evening.
-
Please have a look at the Felix printers, they are of a totally different mechanical quality level. There are base models which you can assemble yourself up to the top model with auto bed leveling and dual extrusion. Software is good and the printers are open source. I found the direct extruder much…
-
Why not look at a Felix?
-
Take a reprap printer and elongate it… Just some aluminium profiles and belts needed and a large glass build plate. Easier: learn to cut-up your models and mount them together.
-
Clearance between parts is very dependant on design an orientation. Sometimes 0,4mm works for horizontal separation but for joints with overhang it might be impossible to get them moving.
-
This works fine on my Felix Pro 1, even though the bed is 0,05mm unflat. MATERIAL PLA 200°C first layer 190°C consecutive layers BED kapton bed, cleaned with alcohol or ammonia 55°C bed temperature nozzle distance is about 1 layer of paper (0,1mm) EXTRUSION 0,35mm nozzle 0,4mm extrusion w…
