-
Hello Eric, i had to do some tweaking before I got mine to print great. when I received my I was having size issues, for example, if I printed an object with a height of 13mm it came out 10 or 11mm. After reding the forums I learned that the R1 has new metric rods, I had to download the firmware …
-
Oops, I checked my slicer program and it is mm/min. That’s what it get for relying on brain matter.
-
I use Sainsmarts flexable TPU. I wanted to test flexible filament but I did not want to spend $50.00 for the Ninjflex.my settings are extruder temp: 225c bed temp: 35c print speed: 1800mm/s reaction speed: 1800mm/s. Attached are some pictures of the iPhone case. Got the stl from thingiverse.com [i…
-
I have not printed with Ninjaflex but I have printed with TPU flexible filament which works very well with the Makergear M2. I have printed iPhone case which turned out great. I believe Ninjaflex is a little more softer than TPU. Hope this helps .
-
My problem was kind of the same and it turned out to be the cracked bearing housing problem. It was driving me crazy so I took the X axis and sure enough the black plastic bearing housing was cracked. Carefully I printed one off and it is working again.
-
Hello, My Makergear M2 is at your service, I can do PLA or ABS just tell me the color. You can contact me by email or the hub, thanks for the opportunity.
