-
Ok I found out the solution. First i had to go to printer settings/printer shape and there set home y x and z to max instead of min. Then in the upper left hand i went to Config and in there to Firmware Eeprom Configurations. In there find Z-max length and if it is 0 there is your problem. It contro…
-
No i didn’t but customer support finally contacted me and said the problem must be with the soft socket (the probe) so they sent me another one. its been 2 weeks and i still didn’t get it. i really regret buying this because everything seems to be working but the auto level doesn’t…
-
they were all 2 gig bc i wasn’t sure if the printer could handle it. But bigger sd cards might work but for me 2 gig’s is enough for what i am doing.
-
Yeah i agree with that. The SD card that i found worked was a Toshiba 2GB memory card.
-
I went ahead and bought several different types of sd cards. Then i tried each one and i found one that works. It has folders on it oddly enough, and it still worked. It uses G-code
-
Hey Jared, I recently also bought my first printer for the same reason as you rc hobbies. for your first question i went with a delta and the reason is because it is stronger, larger build space, easier to put together, and costs less then most printers. Just for reference i bought the k200 delta…
-
Thank you so much! It worked! i was having the same issue with my computer not recognizing the printer. Now my z probe does not work but they are sending me another one. Hope there won’t be to many problems in the near future. Also all i did is download the drivers and then my computer connected to …
