Skip to main content
Skip to profile content
-
It turned out that I had the z steppers plugged into the wrong pins.https://reprap.org/mediawiki/images/6/6d/Rampswire14.svg This picture shows, there is two rows of pins near the z stepper pins, I had them plugged into the top pins, but they need to be plugged into the bottom ones.they work perfec…
-
I have this EXACT same issue! It seems that when I send a z homing command through pronterface it always goes the same direction. But all other z move commands seem to randomly pick up or down regardless of direction specified by the command. Were you able to figure anything out?
