Skip to main content
Skip to profile content
-
Well, the filament is not the problem, since all motors are moving, I really recommend changing the software. Download Cura, it’s a free and much better slicer than repetier host. Download link: https://ultimaker.com/en/products/ultimaker-cura-software Download and install it, then put your model i…
-
Do the following steps in sequence - Check twice if the motors are connected in the right spots in the motherboard - Check if the motors are connected at all - Check if the current of the motors isn’t to small - Check if the bouldrate is right - Try printing via SD Card - Try other slicing sof…
