-
I set up a flashforge creator dual with cura 3.2. The machine settings only has an option in the drop-down for one extruder. I didn’t set up with this printer on 3.1 so I don’t know if this problem is new for 3.2. My settings … [screenshot_from_2018-02-09_17-48-27.png]
-
Thank you, thank you, thank you. It was driving me crazy. I award you a karma point for your next life.
-
Some additional information: I just found out that my left extruder gets a similar error as my bed heater. When trying to print I see this in the terminal … (btw, what do the asterisks mean in the gcode below?) Recv: start Send: N0 M110 N0*125 Send: N0 M110 N0*125 Recv: Sailfish v7.6 Recv: echo…
-
I’ve had a Flashforge Creator Dual printer and octoprint running fine for months with no problem. Recently I lost my settings for octoprint and cura. After setting those up again the printer prints fine but the bed doesn’t heat up. After the bed heater command FF is returning a message something lik…
-
This is embarrassing but the problem was user (me) error. I had left on a ruler that was invisible at the scale I was looking at when I output to stl. What threw me was that I saw the same symptoms when googling the problem. I apologize for wasting your time. I wasted almost a day of my time.
-
I reloaded my mac OS from scratch, installed 15.04.4, and still have the same problem. I went back to an old stl file and that file worked. So it is something with the new stl file that triggers the bug. If anyone wants a copy of the file for debugging cura let me know. I created the file exactly …
-
I tried going back, version by version, to 15.04.4 and the problem wouldn’t go away. I even found the downloaded installer for my very first install of Cura in April and installed it. Since that version worked until I upgraded I suspected old settings or something were still around in my computer. I…
-
> I rolled back to an older version (15.04.4) and the problem went away I’ll give that a try, thanks. I tried 2.1 but it doesn’t support printrbot yet. When googling the problem I see that Lay Flat has been troublesome for a long time.
-
I’m using the latest cura as of 7/4/2016 (I can’t find the version number in the UI). It has worked fine for months with stl output of openscad. Now doing the exact thing I’m having a problem. When I load the objects they appear up in the air where they were in the cad instead of down on the bad. I …
