-
The better market to silicon mold is if you make parts from this mold to sell. So you can reduce de cost your production. I use when my clients request a large production, normally above 100 units.
-
If u increase the angle of suport and create some manuality parts u can get beter results.
-
Something depends on exactly how your model. But if you want print the terrain and buildings, separate these parts for printing and assembly after. Look some print that i did. this is compost about 9 parts for base and more 9 building. one have more details. You can print in PLA, this is more easy…
-
You could do PLA Lost casting, if the printing in wax cost to much.
-
In solid works or another surface modeling program you need close all holes, couldn´t have any gap between surfaces. the best way is use knit surface in solid works. So 3D printing software understands what is inside and what is outside and can generate a g code correctly. Also is good always repair…
-
everything depends the necessity of production, if the custumer needs the mold, not the piece, he probably knows about it because knows how to work with casting. I said several pieces, but could be just 5, if the 3d printed part takes 25hours to print, you could make the mold and the final casting i…
-
You have experience with silicone molds ? Have any uses for this, but only when you need to replicate several piece you normaly use. Could have market if you have any part to play on a larger scale , or a part in other material besides plastic 3D printed. The rate depends your cost of the materials…
