-
It sounds dumb, but I did this once and kinda freaked out about it. Check your settings to make sure you’ve set the correct nozzle. I slipped up, set one nozzle to heat but the other to actual print, so the motor was feeding dry on one side, meaning nothing was coming out, and the other side was jus…
-
Ho boy, bed leveling. Another learning curve in 3d printing I wasn’t prepared for. Ultimately what works best for me there is a piece of slightly thick paper from some tiny little notepad I had lying around. It’s thinner than typical card stock, thinner for sure than a business card, but thicker tha…
-
Either Iceman24k is misunderstanding your question or I am. If you’re looking to create your own 3d models and print them, Makerware, Cura and Simplify3d are only gonna get you the tail end of what you’re asking. If you need something to model NEW objects with, you’ll have to look elsewhere, but the…
-
The Makerware/Makerbot software included with your printer works quite well with the QIDI printers. It’s the only desktop software I’ve found that actually recognizes the printer accurately and adjusts bed dimensions and other settings accordingly. Admittedly, I haven’t used the Flashprint software …
-
You may have a bent axis rod. Contact QIDI Tech support ASAP. They are extremely helpful at troubleshooting and rushing you parts to repair when necessary.
-
Is it possible to to customize this widget so that it submits an STL from the server hosting the button (i.e. my own site) or an external URL so that the user isn’t required to upload their own model? I’ve got an object available on Thingiverse and rather than have less than savvy users first downlo…
