-
Looking better! That brand of ABS just looks like it needs different settings for optimal output. I think you’re on the right track. Keep posting as you get new results.
-
Looks like this: http://reprap.org/wiki/Print\_Troubleshooting\_Pictorial\_Guide#Too\_hot\_2 Cooling issue. My guess is the bed is too hot for this brand of ABS and the long print time of the fine settings. Trouble with cooling the bed more during printing is the likelihood of warping. If the part d…
-
Also consider the overhangs on Marvin. When printing the eyebrows and eyes at say, .2 layers, the overhang is minor relative to the layer height As the layer height decreases to .05mm, the overhang becomes that much greater (4 times in this case) relative to the layer height, and 4 times as difficul…
-
I agree with the other users. Tune your Flow % in Cura down a bit and that should come out better. I run around 85% on nearly all my prints. May be a bit different for various filaments. But turning up the infill to 50% or so will help your top layers still come out nice.
-
This looks to me like either an acceleration issue, a loose belt, or something similar. What printer is this, and do you know the acceleration setting?
-
Wow, those prints look fantastic though! And I wish I could be there to smell it, too
-
Lulzbot Mini is a solid build and has a solid warranty. Also has a trick auto bed-leveling function that makes getting started very quick and easy. Best to use Lulzbot’s filament for that, but with some temperature adjustments you can really use any filament that prints under 300C. Very good value f…
